A-A-52176 - Resistors, Variable, Non-Wire-Wound, Precision
A-A-55088 - Resistors, Flameproof, Fusible
This (CID) covers the general requirements for flameproof, fusible resistors. These resistors act as a wire-wound resistor and a fuse, and are used in applications where precise control of fusing point and time lags are necessary. These resistors eliminate fire hazard and circuit board damage due to overheated components. Resistors covered by this CID are intended for commercial/industrial applications and are not used in military systems needing stringent environmental and electrical requirements.
A-A-55157 - Resistor, Fixed, Wirewound, Inductive, Power Type (S/S By A-A-59715/1)
This commerical item description (CID) covers the general requirements for wirewound, power type, resistors. These resistors are an all welded construction and rugged, flame resitant conformal vitreous enamel coating to ensure successful performance under high temperatures. Resistors supplied to this (CID) have hollow core construction which accommodates rigid mounting with brackets or through bolts.
A-A-55159 - Resistor, Wirewound, Inductive, Power Type (S/S By A-A-59715/1)
This commercial item description (CID) covers the general requirements for wirewound, power type, resistors. These resistors are an all welded construction and rugged, flame resistant conformal vitreous coating to ensure successful performance under high temperatures. Resistors supplied to this (CID) have hollow core construction which accommodates rigid mounting with brackets or through bolts.
A-A-55501 - Resistors, Fixed, Zero Ohm, 1/4 Watt
This CID covers the general requirements for an axial leaded zero ohm resistors. Resistors covered by this CID are intended for commercial/industrial applications and are not used in military systems needing stringent environmental and electrical requirements.
A-A-55502 - Resistor, Fixed, Zero Ohm, 1/8 Watt
This CID covers the general requirements for axial leaded zero ohm resistors. Resistors covered by this CID are intended for commercial/industrial applications and are not to be used in military systems needing stringent environmental and electrical requirements.
A-A-55512 - Resistor, Thermally Sensitive (Thermistor)
This (CID) covers the general requirements for a thermistor. This thermistor is a stainless steel probe with a flange, for air (open ended) and liquid (sealed ended) measurements. These parts come with insulated leads in four different lengths. Thermistors covered by this CID are intended for commercial/industrial applications and are not used in military systems needing stringent environmental and electrical requirements.
A-A-55562 - Resistor, Voltage Sensitive (Varistor, Metal Oxide), Chip
This CID covers the general requirements for a varistor. The varistor covered by this CID is intended for commercial/industrial applications.
A-A-55562/1 - Resistor, Voltage Sensitive (Varistor, Metal Oxide), Chip, Style 0603
This CID covers the requirements for a surface-mount, voltage sensitive resistor, style 0603. Varistors by this CID are intended for commercial/industrial applications.
A-A-55562/2 - Resistor, Voltage Sensitive (Varistor, Metal Oxide), Chip, Style 0805
This CID covers the requirements for a surface-mount, voltage sensitive resistor, style 0805. Varistors by this CID are intended for commercial/industrial applications.
A-A-55562/3 - Resistor, Voltage Sensitive (Varistor, Metal Oxide), Chip, Style 1206
This CID covers the requirements for a surface-mount, voltage sensitive resistor, style 1206. Varistors by this CID are intended for commercial/industrial applications.
A-A-55562/4 - Resistor, Voltage Sensitive (Varistor, Metal Oxide), Chip, Style 1210
This CID covers the requirements for a surface-mount, voltage sensitive resistor, style 1210. Varistors by this CID are intended for commercial/industrial applications.
A-A-55564 - Resistor, Voltage Sensitive (Varistor) General Requirements For
This CID covers the general requirements for a transient voltage suppression device. These varistors offer high energy capabilities and voltage clamping characteristics. Requirements for specific varistors are covered in the individual CID sheets. The varistors covered by this CID are intended for commercial/industrial applications.
A-A-55564/1 - Resistor, Voltage Sensitive (Varistor), Base Mount
A-A-55564/2 - Resistor, Voltage Sensitive (Varistor), Metal Oxide, High Energy
AN3155 - ( Images) Rheostats: Aircraft Power (S/S By Mil-Dtl-6749)
AN5534 - ( Images) Resistor - Thermocouple Lead Spool (S/S By Mil-Dtl-7790)
AN5535 - Resistor & Adjustable Thermocouple Lead
EIA-RS385 - Preferred Values
This standard establishes six series of numbers which nay be used as preferred values in the design of electronic components, equipment or systems.
JAN-R-184 - Resistor, Fixed, Wirewound (Low Power)
MIL-A-13196 - Attenuator, Variable Cn-7/Ura-Ti
This specification covers one type of equipment designated as Attenuator CN-7/URA-T1. It is used for reducing the range of transmission of transmitters, which are supplied modulation voltages by Training Generator AN/URA-T1 by absorption of r-f power up to 100 watts.
MIL-DTL-15109 - Resistors And Rheostats, Naval Shipboard
This specification covers Class III shockproof resistors and rheostats for Naval shipboard service.
MIL-PRF-122 - Resistors, Fixed, Precision, Established Reliability, General Specification For (S/S By Dscc Dwgs 97009, 97010 And 97011)
This specification covers the general requirements for hermetically sealed, high precision, low reactance, fixed, resistors that possess a high degree of stability with respect to time under severe life failure rates ranging from 1 percent to 0.001 percent per 1,000 hours (see 1.2.1.2). These failure rates are established at 60percent confidence on the basis of life tests.
MIL-PRF-122/1 - Resistors, Fixed, Film, Precision, Established Reliability, Style Rfp01 (S/S By Dscc Dwgs 97009, 97010, And 97011)
This specification covers the detail requirements for established reliability, precision, film, fixed resistors. Resistors are available within the full range of reactance, tolerance, and failure rates.
MIL-PRF-122/10 - Resistors, Fixed, Film, Precision, Established Reliability, Style Rfp10 (S/S By Dscc Dwgs 97009, 97010, And 97011)
MIL-PRF-122/3 - Resistors, Fixed, Film, Precision, Established Reliability, Style Rfp03 (S/S By Dscc Dwgs 97009, 97010, And 97011)
MIL-PRF-12934 - Resistor, Variable, Wire-Wound, Precision General Specification For
This specification covers the general requirements for precision, wirewound, variable resistors whose electrical output (in terms of percent of applied voltage) are linear or nonlinear with respects to the angular position of the shaft. This specification includes requirements for linear and nonlinear, single turn and multiturn, single-section (cup) and multisection variable resistors. These resistors are capable of full-load operation at maximum ambient temperatures of 70 degrees C and 85 degrees C and are suitable for continuous operation, when properly derated, to maximum temperatures of 125 degrees C and 150 degrees C (see 3.1, 6.2, and figure 10). This specification includes requirements for category I, category II, and category III precision resistors as described herein (see 3.2).
MIL-PRF-12934/1 - Resistor, Variable, Wirewound, Precision, Style Rr0900
This specification covers the requirements for style RR0900, precision, wirewound, variable resistors.
MIL-PRF-12934/10 - Resistor, Variable, Wirewound, Precision, Style Rr3100
This specification covers the requirements for style RR3100, precision, wirewound, variable, resistors.
MIL-PRF-12934/15 - Resistor, Variable, Wirewound, Precision, Style Rr3200
This specification covers the requirements for style RR3200, variable, wirewound, precision resistors.
MIL-PRF-12934/16 - Resistor, Variable, Wirewound, Precision, Style Rr3300
This specification covers the requirements for style RR3300, precision, wirewound, variable, resistors.
MIL-PRF-12934/17 - Resistor, Variable, Wirewound, Precision, Style Rr3400
This specification covers the requirements for style RR3400, precision, wirewound, variable resistors.
MIL-PRF-12934/18 - Resistor, Variable, Wirewound, Precision, Style Rr3500
This specification covers the requirements for style RR3500, precision, wire-wound, variable, resistors.
MIL-PRF-12934/19 - Resistor, Variable, Wirewound, Precision, Style Rr1300
This specification covers the requirements for style RR1300, precision, wirewound, variable resistors.
MIL-PRF-12934/2 - Resistor, Variable, Wirewound, Precision, Style Rr1100
This specification covers the requirements for style RR1100, precision, wirewound, variable resistors.
MIL-PRF-12934/20 - Resistor, Variable, Wirewound, Precision, Style Rr1400
This specification covers the requirements for style RR1400, precision, wirewound, variable resistors.
MIL-PRF-12934/27 - Resistor, Variable, Wirewound, Precision, Style Rr3600
This specification covers the requirements for style RR3600, precision, wirewound, variable resistors.
MIL-PRF-12934/28 - Resistor, Variable, Wirewound, Precision, Style Rr3700
This specification covers the requirements for style RR3700, precision, wirewound, variable resistors.
MIL-PRF-12934/29 - Resistor, Variable, Wirewound, Precision, Style Rr3800
This specification covers the requirements for style RR3800, precision, wirewound, variable resistors.
MIL-PRF-12934/30 - Resistor, Variable, Wirewound, Precision, Style Rr3900
This specification covers the requirements for style RR3900, precision, wirewound, variable resistors.
MIL-PRF-12934/31 - Resistor, Variable, Wirewound, Precision, Style Rr4000
This specification covers the requirements for style RR4000, precision, wirewound, variable resistors.
MIL-PRF-12934/32 - Resistor, Variable, Wirewound, Precision, Style Rr4100
This specification covers the requirements for style RR4100, precision, wirewound, variable resistors.
MIL-PRF-12934/33 - Resistor, Variable, Wirewound, Precision, Style Rr2002
This specification covers the requirements for style RR2002, precision, wirewound, variable resistors.
MIL-PRF-12934/34 - Resistor, Variable, Wirewound, Precision, Style Rr1004
This specification covers the requirements for style RR1004, precision, wirewound, variable resistors.
MIL-PRF-12934/35 - Resistor, Variable, Wirewound, Precision, Style 2Rr2104
This specification covers the requirements for style 2RR2104, precision, wirewound, variable resistors.
MIL-PRF-12934/36 - Resistor, Variable, Wirewound, Precision, Style Rr3601
This specification covers the requirements for style RR3601, variable, wirewound, precision resistors.
MIL-PRF-12934/4 - Resistor, Variable, Wirewound, Precision, Style Rr2000
This specification covers the requirements for style RR2000, precision, wirewound, variable resistors.
MIL-PRF-12934/5 - Resistor, Variable, Wirewound, Precision, Style Rr3000
This specification covers the requirements for style RR3000, precision, wirewound, variable resistors.
MIL-PRF-12934/6 - Resistor, Variable, Wirewound, Precision, Style Rr1000
This specification covers the requirements for style RR1000, variable, wirewound, precision resistors.
MIL-PRF-12934/9 - Resistor, Variable, Wirewound, Precision, Style Rr2100
This specification covers the requirements for style RR2100, precision, wirewound, variable resistors.
MIL-PRF-18546 - Resistors, Fixed, Wire-Wound (Power Type, Chassis Mounted), General Specification For
This specification covers the general requirements for power type, wire wound, fixed resistors which utilize the principal of heat dissipation through a metal mounting surface. The resistors have an initial resistance tolerance of -�1 percent and a resistance temperature characteristic range from 30 ppm/Degrees C to 200 ppm/Degrees C depending upon the resistance value. They are not capable for application when the alternating current (ac) characteristics are of critical importance; however, provisions have been made to minimize the inductance.
MIL-PRF-18546/2 - Resistors, Fixed, Wire-Wound (Power Type, Chassis Mounted), Styles Re77 And Re80
This specification covers the requirements for styles RE77 and RE80 resistors.
MIL-PRF-19 - Resistor, Variable, Wirewound (Low Operating Temperature), General Specification For
This specification covers the general requirements for variable resistors having a resistance element of wirewound on an insulating strip shaped in an arc, so that a contract bears uniformly on the resistance element when adjusted by a control shaft. These resistors are capable of full load operation at an ambient temperature of +40 degrees C and are capable of continuous operation when properly derated, at a maximum temperature of +105 degrees C.
MIL-PRF-19/1 - Resistors, Variable, Wire-Wound (Low Operating Temperature), Style Ra10 (See Notice 3 For Replacement Information)
MIL-PRF-19/2 - Resistor, Variable, Wirewound (Low Operating Temperature), Style Ra20
This specification covers the requirements for style RA20, low operating temperatures, wirewound, variable resistors.
MIL-PRF-19/3 - Resistor, Variable, Wirewound (Low Operating Temperature), Style Ra30
This specification covers the requirements for style RA30, low operating temperature, wirewound, variable resistors.
MIL-PRF-22 - Resistors, Variable, Wirewound, Power Type, General Specification For
This specification covers the general requirements for power type variable resistors having a resistance element of wire, wound linear on an insulating strip shaped in an arc, such that a contact bears uniformly on the resistance element when adjusted by a control shaft. The power ratings (see 3.1) cover a range from 6.25 watts to 1,000 watts, inclusive (see 6.2).
MIL-PRF-22/1 - Resistor, Variable, Wirewound, Power Type, Unenclosed, Style Rp06
This specification covers the requirements for style RP06, variable, wirewound, power type, unenclosed resistors.
MIL-PRF-22/10 - Resistor, Variable, Wirewound, Power Type, Unenclosed, Style Rp35
This specification covers the requirements for style RP35, variable, wirewound, power type, unenclosed resistors.
MIL-PRF-22/11 - Resistor, Variable, Wirewound, Power Type, Unenclosed, Style Rp40
This specification covers the requirements for style RP40, variable, wirewound, power type, unenclosed resistors.
MIL-PRF-22/12 - Resistor, Variable, Wirewound, Power Type, Unenclosed, Style Rp45
This specification covers the requirements for style RP45, variable, wirewound, power type, unenclosed resistors.
MIL-PRF-22/13 - Resistor, Variable, Wirewound, Power Type, Unenclosed, Style Rp50
This specification covers the requirements for style RP50, variable, wirewound, power type, unenclosed resistors.
MIL-PRF-22/14 - Resistor, Variable, Wirewound, Power Type, Unenclosed, Style Rp55
This specification covers the requirements for style RP55, variable, wirewound, power type, unenclosed resistors.
MIL-PRF-22/15 - Resistor, Variable, Wirewound, Power Type, Enclosed, Style Rp05
This specification covers the requirements for style RP05, variable, wirewound, power type, enclosed resistors.
MIL-PRF-22/2 - Resistor, Variable, Wirewound, Power Type, Enclosed, Style Rp07
This specification covers the requirements for style RP07, variable, wirewound, power type, enclosed resistors.
MIL-PRF-22/3 - Resistor, Variable, Wirewound, Power Type, Unenclosed, Style Rp10
This specification covers the requirements for style RP10, variable, wirewound, power type, unenclosed resistors.
MIL-PRF-22/4 - Resistor, Variable, Wirewound, Power Type, Enclosed, Style Rp11
This specification covers the requirements for style RP11, variable, wire-wound, power type, enclosed resistors.
MIL-PRF-22/5 - Resistor, Variable, Wirewound, Power Type, Unenclosed, Style Rp15
This specification covers the requirements for style RP15, variable, wirewound, power type, unenclosed resistors.
MIL-PRF-22/6 - Resistors, Variable, Wirewound, Power Type, Enclosed, Style Rp16
This specification covers the requirements for style RP16, variable, wirewound, power type, enclosed resistors.
MIL-PRF-22/7 - Resistor, Variable, Wirewound, Power Type, Unenclosed, Style Rp20
This specification covers the requirements for style RP20, variable, wirewound, power type, unenclosed resistors.
MIL-PRF-22/8 - Resistor, Variable, Wirewound, Power Type, Unenclosed, Style Rp25
This specification covers the requirements for style RP25, variable, wirewound, power type, unenclosed resistors.
MIL-PRF-22/9 - Resistor, Variable, Wirewound, Power Type, Unenclosed, Style Rp30
This specification covers the requirements for style RP30, variable, wirewound, power type, unenclosed resistors.
MIL-PRF-22097 - Resistors, Variable, Nonwirewound, Adjustment Type, General Specification For
This specification covers the general requirements for multi-turn lead screw actuated and single turn nonwirewound, variable resistors with a contact bearing uniformly over the entire surface of the entire resistive element, when positioned by the actuator. These resistors are capable of full load operation (where maximum resistance is engaged) at a maximum ambient temperature of 70 Degrees C and 85 Degrees C, and are capable for continuous operation when properly derated, at a maximum temperature of 125 Degrees C and 150 Degrees C (see figure 1). These resistors have a resistance of -�10 percent (see 3.1).
MIL-PRF-22097/1 - Resistor, Variable, Nonwirewound, Adjustment Type, Lead Screw Actuated, Style Rj11
This specification covers the requirements for style RJ11, adjustment type, lead screw actuated, nonwirewound, variable resistors. This style is available in characteristics A.
MIL-PRF-22097/2 - Resistor, Variable, Nonwirewound, Adjustment Type, Lead Screw Actuated, Style Rj12
This specification covers the requirements for style RJ12, adjustment type, lead screw actuated, nonwirewound, variable resistors. This style is available in characteristics C (inactive for new design) and F.
MIL-PRF-22097/3 - Resistor, Variable, Nonwirewound, Adjustment Type, Lead Screw Actuated, Style Rj22
This specification covers the requirements for style RJ22, adjustment type, lead screw actuated, nonwirewound, variable resistors. This style is available in characteristic C (used characteristic F as a replacement for characteristic C) and characteristic F.
MIL-PRF-22097/4 - Resistor, Variable, Nonwirewound, Adjustment Type, Lead Screw Actuated, Style Rj24
This specification covers the requirements for style RJ24, adjustment type, lead-screw actuated, nonwirewound, variable resistors. This style is available in characteristics C (used characteristic F as a replacement for characteristic C) and F.
MIL-PRF-22097/5 - Resistor, Variable, Nonwirewound, Adjustment Type, Lead Screw Actuated, Style Rj26
This specification covers the requirements for style RJ26, adjustment type, lead screw actuated, nonwirewound, variable resistors. This style is available in characteristic C (used characteristic F as a replacement for characteristic C) and characteristic F.
MIL-PRF-22097/6 - Resistor, Variable, Nonwirewound (Adjustment Type, Single Turn), Style Rj50
This specification covers the requirements for style RJ50, adjustment type, single turn, nonwirewound, variable resistors. This style is available in characteristic C (used characteristic F as a replacement for characteristic C) and characteristic F.
MIL-PRF-22684 - Resistors, Fixed, Film (Insulated) General Specification For
This specification covers the general requirements for insulated, film, fixed resistors of 2- and 5- percent resistance tolerance. These resistors are capable of full-load operation at an ambient temperature of 70 degrees C and have a resistance-temperature characteristic of +200 parts per million per degree Celsius (ppm/degrees C), (see 6.1). Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.10).
MIL-PRF-22684/8 - Resistors, Fixed, Film, Insulated, Style Rl42....Tx
This specification covers the associated requirements for insulated, film, fixed resistors of 2-percent and 5-percent resistance tolerance. These resistors are capable of full-load operation at an ambient temperature of 70 degrees C and have a resistance-temperature characteristic of +200 parts per million per degree Celsius (ppm/degrees C). Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.3)
MIL-PRF-23285 - Resistor, Variable, Nonwire-Wound General Specification For
MIL-PRF-23285/3 - Resistors, Variable, Nonwire-Wound, Style Rvc6
This specification covers the detail requirements for style RVC6 resistors.
MIL-PRF-23648 - Resistor, Thermal (Thermistor) Insulated, General Specification For
This specification covers the general requirements for general purpose insulated thermal resistors to be used for temperature compensation, control, and measurement over the temperature range specified.
MIL-PRF-23648/1 - Resistor, Thermal (Thermistor), Insulated Negative Temperature Coefficient Style Rth06
This specification covers the performance requirements for style RTH06 thermistors. This style is available in resistance ratios A, B, and C. The only terminal lead available is S type. Resistance tolerance versus temperature characteristics F, G, J, and K are applicable through the maximum temperature of 125 degrees C.
MIL-PRF-23648/10 - Resistor, Thermal (Thermistor), Insulated Negative Temperature Coefficient Style Rth24
MIL-PRF-23648/11 - Resistor, Thermal (Thermistor), Insulated Negative Temperature Coefficient Style Rth26
MIL-PRF-23648/19 - Resistor, Thermal (Thermistor), Hermetically Sealed, Positive Temperature Coefficient, Style Rth42
This specification covers the detail requirements for style RTH42 thermistors. This style is available in resistance ratio E only. Terminal leads type S and W are available. Resistance tolerance versus temperature characteristics G, J, and K are applicable through the maximum temperature of 125 degrees C.
MIL-PRF-23648/2 - Resistor, Thermal (Thermistor), Insulated Negative Temperature Coefficient Style Rth08
This specification covers the requirements for style RTH08 thermistors. This style is available in resistance ratios A, B, and C. The only terminal lead available is S type. Resistance tolerance versus temperature characteristics F, G, J, and K are applicable through the maximum temperature of 125 degrees C.
MIL-PRF-23648/20 - Resistor, Thermal (Thermistor), Insulated Negative Temperature Coefficient Style Rth44
This specification covers the detail requirements for style RTH44 thermistors. This style is available in resistance ratios A, B, and C. The only terminal lead available is S type. Resistance tolerance versus temperature characteristics F, G, J, and K are applicable through the maximum temperature of 125 Degrees C.
MIL-PRF-23648/3 - Resistor, Thermal (Thermistor), Insulated Negative Temperature Coefficient Style Rth10
This specification covers the requirements for style RTH10 thermistor. This style is available in resistance ratios A, B, and C. The only terminal lead available is S type. Resistance tolerance versus temperature characteristics F, G, J, and K are applicable through the maximum temperature of 125 degrees C.
MIL-PRF-23648/8 - Resistor, Thermal (Thermistor), Insulated Positive Temperature Coefficient Style Rth20
MIL-PRF-23648/9 - Resistor, Thermal (Thermistor), Insulated Positive Temperature Coefficient Style Rth22
This specification covers the detail requirements for style RTH22 thermistors. This style is available in resistance ratio E only. Terminal leads type S and W are available. Resistance tolerance versus temperature characteristics G, J, and K are applicable through the maximum temperature of 125 degrees C.
MIL-PRF-26 - Resistors, Fixed, Wire Wound (Power Type) General Specification For
This specification covers the general requirements for power type, wirewound, fixed resistors for use in electrical, communications, and associated equipment. Included are general purpose styles of 5 percent initial resistance tolerance, with power ratings ranging from 3 watts to 240 watts at 25 Degrees C, derated to 0 power at 350 Degrees C (characteristics N and V) and precision axial lead types of .1(B) percent, .5 (D)percent, and 1 (F) percent initial resistance tolerances with power ratings ranging from 1 watt to 10 watts at 25 Degrees C, derated to 0 power at 250 degrees C (characteristic U).
MIL-PRF-26/3 - Resistor, Fixed, Wirewound (Power Type), Styles Rw29, Rw30 1/, Rw31, Rw32 1/, Rw33, Rw34 1/, Rw35, Rw36 1/, Rw37, Rw38, Rw39 1/, And Rw47
This specification covers the associated requirements for styles RW29, RW30 1/, RW31, RW32 l/, RW33, RW34 1/, RW35, RW36 1/, RW37, RW38, RW39 1/, and RW47, wirewound inductive (V) and noninductive (N) resistors.
MIL-PRF-26/4 - Resistor, Fixed, Wire-Wound (Power Type), Styles Rw55, Rw56, Rw67, Rw68, And Rw69
This specification covers the associated requirements for styles RW55, RW56, RW67, RW68, and RW69, wirewound inductive resistors.
MIL-PRF-27208 - Resistor, Variable, Wirewound, Nonprecision General Specification For
This specification covers the general requirements for multiturn, lead-screw actuated and single turn wirewound, variable resistors with a contact bearing uniformly over the entire surface of the entire resistive element, wound linearly, when positioned by an actuator. These resistors are capable of full load operation (where maximum resistance is engaged) at maximum ambient temperature of 85 Degrees C, and are capable for continuous operation when properly derated, at a maximum temperature of 150 Degrees C (see figure 2). These resistors have a resistance tolerance of -�5 percent (see 3.1).
MIL-PRF-27208/10 - Resistor, Variable, Wirewound, Adjustment Type, Lead Screw Actuated, Style Rt26
This specification covers the requirements for style RT26 adjustment type, lead screw actuated, wirewound, variable resistors.
MIL-PRF-27208/2 - Resistors, Variable, Wire-Wound (Adjustment Type, Lead-Screw Actuated), Style Rt10
This specification covers the detail requirements for style RT10, adjustment type, lead-screw actuated, wire-wound, variable resistors.
MIL-PRF-27208/8 - Resistor, Variable, Wirewound, Adjustment Type, Lead Screw Actuated, Style Rt12
This specification covers the requirements for style RT12 adjustment type, lead screw actuated, wirewound, variable resistors.
MIL-PRF-27208/9 - Resistor, Variable, Wirewound, Adjustment Type, Lead Screw Actuated, Style Rt24
This specification covers the requirements for style RT24 adjustment type, lead screw actuated, wirewound, variable resistors.
MIL-PRF-29 - Resistors, Fixed, Meter Multiplier, External (High Voltage, Ferrule Terminal Type)
This specification covers the requirements for high-voltage, external, meter-multiplier, fixed resistors of the ferrule-terminal type for use with direct-current (dc) instruments drawing 1 milliampere at full-scale deflection. Designers are CAUTIONED on using these resistors in pulse applications (see 6.5).
MIL-PRF-39002 - Resistors, Variable, Wirewound, Semi-Precision, General Specification For
This specification covers the general requirements for semi-precision, wirewound, variable, resistors having a resistance element of wire, wound on an arc shaped insulated form, so that a contact bears uniformly on the resistance element, when adjusted by a contact shaft. The electrical output (in terms of percent of applied voltage) is linear with respect to the angular position of the contact arm. These resistors are capable of full-load operation (when the maximum resistance is engaged) at a maximum ambient temperature of 85 Degrees C, and are suitable for continuous operation, when properly derated, at a maximum temperature of 135 Degrees C. These resistors have a tolerance of ??5 percent.
MIL-PRF-39002/1 - Resistor, Variable, Wirewound, Semi-Precision, Style Rk09
This specification covers the associated requirements for a variable, wirewound, semi-precision resistors. These resistors are capable of full load operation at a maximum ambient temperature of 85 Degrees C, and suitable for continuous operation. These resistors have a tolerance of ??5 percent.
MIL-PRF-39002/3 - Resistor, Variable, Wirewound, Semi-Precision, Style Rk11
This specification covers the associated requirements for a variable, wirewound, semi-precision resistors. These resistors are capable of full load operation at a maximum ambient temperature of 85 Degrees C, and suitable for continuous operation. These resistors have a tolerance of ??5 percent.
MIL-PRF-39005 - Resistors, Fixed, Wirewound (Accurate), Nonestablished Reliability, Established Reliability, General Specification For
This specification covers the general requirements for nonestablished reliability (non-ER), established reliability (ER), accurate, wire-wound, fixed resistors that have a maximum resistance tolerance of 1 percent and a high degree of stability with respect to time under specified environmental conditions. The resistors are capable for continuous full-load (or voltage) operation at any ambient temperature up to 125??C, and when derated, up to 145??C (see 6.5). They are not capable for application where the alternating current (ac) characteristics are of critical importance. ER resistors have life failure rates (FR) ranging from 1.0 percent to 0.001 percent per 1,000 hours (see 1.2.1.5). These FR are established at 60-percent confidence level on the basis of the life tests. The FR, identified by the appropriate symbol, is referred to operation at full rated voltage and temperature.
MIL-PRF-39005/1 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability And Established Reliability Style Rbr52
This specification covers the performance requirements for style RBR52, nonestablished reliability, established reliability, accurate, wire wound, fixed resistors.
MIL-PRF-39005/10 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability, And Established Reliability Style Rbr76
This specification covers the performance requirements for style RBR74, nonestablished reliability, established reliability, accurate, wire-wound, fixed resistors.
MIL-PRF-39005/11 - Resistors, Fixed, Wire Wound (Accurate), Nonestablished Reliability And Established Reliability Style Rbr80 And Rbr81 1/
This specification covers the performance requirements for styles RBR80 and RBR81 1/, nonestablished reliability, established reliability, accurate, wire-wound, fixed resistors.
MIL-PRF-39005/2 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability And Established Reliability Style Rbr53
This specification covers the performance requirements for style RBR53, nonestablished reliability, established reliability, accurate, wire wound, fixed resistors.
MIL-PRF-39005/3 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability And Established Reliability Style Rbr54
This specification covers the performance requirements for style RBR54, nonestablished reliability, established reliability, accurate, wire wound, fixed resistors.
MIL-PRF-39005/4 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability And Established Reliability Style Rbr55
This specification covers the performance requirements for style RBR55, nonestablished reliability, established reliability, accurate, wire wound, fixed resistors.
MIL-PRF-39005/5 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability And Established Reliability Style Rbr56
This specification covers the performance requirements for style RBR56, nonestablished reliability, established reliability, accurate, wire wound, fixed resistors.
MIL-PRF-39005/6 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability And Established Reliability Style Rbr71
This specification covers the performance requirements for style RBR71, nonestablished reliability, established reliability, accurate, wire wound, fixed resistors.
MIL-PRF-39005/7 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability And Established Reliability Style Rbr57
This specification covers the performance requirements for style RBR57, nonestablished reliability, established reliability, accurate, wire wound, fixed resistors.
MIL-PRF-39005/8 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability And Established Reliability Style Rbr74
This specification covers the performance requirements for style RBR74, nonestablished reliability, established reliability, accurate, wire-wound, fixed resistors.
MIL-PRF-39005/9 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability And Established Reliability Style Rbr75
This specification covers the performance requirements for style RBR75, nonestablished reliability, established reliability, accurate, wire-wound, fixed resistors.
MIL-PRF-39007 - Resistors, Fixed, Wire-Wound (Power Type), Nonestablished Reliability, Established Reliability, And Space Level General Specification For
This specification covers the general requirements for nonestablished reliability (non-ER), established reliability (ER), or space level, axial lead precision, power type, wire wound, fixed resistors having a +25 ??C ambient operating temperature derated to zero load at +250 ??C for use in electrical, electronic communication, and associated equipment. These resistors have initial resistance tolerances of ??.5 percent, ??.1 percent, and ??1 percent, and a resistance temperature characteristic as given in table I. ER resistors covered by this specification will have failure rates (FR) ranging from 1 percent to .001 percent per 1,000 hours (see 1.2.1.5). These FR are established at 60 percent confidence on the basis of life tests (permissible resistance change of 1.0 percent). Resistors which are noninductively wound with solderable terminals are designated by a terminal designated "N" and "Z". Terminals designated by the letters "S" and "W" are inductively wound with solderable and weldable terminals (see 1.2.1.2).
MIL-PRF-39007/10 - Resistor, Fixed, Wire-Wound (Power Type), Nonestablished Reliability, Established Reliability, And Space Level Style Rwr84
This specification covers the associated requirements for style RWR84, nonestablished reliability, established reliability, and space level, power type, wire-wound, fixed, resistor. These resistors are available with terminal types "S" (solderable, inductively wound), "W" (weldable, inductively wound), "N" (solderable, noninductively wound), and "Z" (weldable, noninductively wound).
MIL-PRF-39007/11 - Resistor, Fixed, Wire-Wound (Power Type), Nonestablished Reliability, Established Reliability, And Space Level Style Rwr89
This specification covers the associated requirements for style RWR89, nonestablished reliability, established reliability, and space level, power type, wire-wound, fixed, resistor. These resistors are available with terminal types "S" (solderable, inductively wound), "W" (weldable, inductively wound), "N" (solderable, noninductively wound), and "Z" (weldable, noninductively wound).
MIL-PRF-39007/12 - Resistor, Fixed Wire-Wound (Power Type), Nonestablished Reliability, Established Reliability, And Space Level Style Rwr82
This specification covers the associated requirements for style RWR82, nonestablished reliability, established reliability, and space level, power type, wire-wound, fixed, resistor. These resistors are available with terminal types "S" (solderable, inductively wound), "W" (weldable, inductively wound), "N" (solderable, noninductively wound), and "Z" (weldable, noninductively wound).
MIL-PRF-39007/5 - Resistor, Fixed, Wire-Wound(Power Type), Nonestablished, Reliability, Established Reliability, And Space Level Style Rwr71
This specification covers the associated requirements for style RWR71, nonestablished reliability, established reliability, and space level, power type, wire-wound, fixed, resistor. These resistors are available with terminal types "S" (solderable, inductively wound), "W" (weldable, inductively wound), "N" (solderable, noninductively wound), and "Z" (weldable, noninductively wound).
MIL-PRF-39007/6 - Resistor, Fixed, Wire-Wound (Power Type), Nonestablished Reliability, Established Reliability, And Space Level Style Rwr74
This specification covers the associated requirements for style RWR74, nonestablished reliability, established reliability, and space level, power type, wire-wound, fixed, resistor. These resistors are available with terminal types "S" (solderable, inductively wound), "W" (weldable, inductively wound), "N" (solderable, noninductively wound), and "Z" (weldable, noninductively wound).
MIL-PRF-39007/7 - Resistor, Fixed, Wire-Wound (Power Type), Nonestablished Reliability, Established Reliability, And Space Level Style Rwr78
This specification covers the associated requirements for style RWR78, nonestablished reliability, established reliability, and space level, power type, wire-wound, fixed, resistor. These resistors are available with terminal types "S" (solderable, inductively wound), "W" (weldable, inductively wound), "N" (solderable, noninductively wound), and "Z" (weldable, noninductively wound).
MIL-PRF-39007/8 - Resistor, Fixed, Wirewound (Power Type), Nonestablished Reliability, Established Reliability, And Space Level, Style Rwr80
This specification covers the associated requirements for style RWR80, nonestablished reliability, established reliability, and space level, power type, wirewound, fixed, resistor. These resistors are available with terminal types "S" (solderable, inductively wound), "W" (weldable, inductively wound), "N" (solderable, noninductively wound), and "Z" (weldable, noninductively wound).
MIL-PRF-39007/9 - Resistor, Fixed, Wire-Wound (Power Type), Nonestablished Reliability, Established Reliability, And Space Level Style Rwr81
This specification covers the associated requirements for style RWR81, nonestablished reliability, established reliability, and space level, power type, wire-wound, fixed, resistor. These resistors are available with terminal types "S" (solderable, inductively wound), "W" (weldable, inductively wound), "N" (solderable, noninductively wound), and "Z" (weldable, noninductively wound).
MIL-PRF-39009 - Resistors, Fixed, Wire-Wound (Power Type, Chassis Mounted), Nonestablished Reliability, Established Reliability, General Specification
This specification covers the general requirements for nonestablished reliability (non-ER), and established reliability (ER), power type, wire wound, fixed resistors which utilize the principal of heat dissipation through a metal mounting surface. These resistors have initial resistance tolerances of ??1 percent. These resistors are suitable for continuous full load operation at an ambient temperature of +25 degrees C, and when derated up to +250 degrees C (see figure 1). These resistors should not be used in circuits where their ac performance is of critical importance in the operation of such circuits. However, provisions have been made in particular styles to minimize inductances (see 3.1). These resistors will have life failure rate levels (FRL) ranging from 1.0 percent to 0.001 percent per 1,000 hours (see 1.2.1.4). These FRL are established at a 60 percent confidence on the basis of the life tests. The FRL, identified by the appropriate symbol, is referred to operation at full rated wattage at +25 degrees C, with a permissible change in resistance of ??2 percent as the criteria for failure.
MIL-PRF-39009/1 - Resistors, Fixed, Wire-Wound, (Power Type, Chassis Mounted), Nonestablished Reliability, And Established Reliability, Styles Rer60, Rer65, Rer70, And Rer75
This specification covers the associated requirements for nonestablished reliability and established reliability styles RER60, RER65, RER70, and RER75 resistors. These resistors are inductively wound.
MIL-PRF-39009/2 - Resistors, Fixed, Wire-Wound, (Power Type, Chassis Mounted), Nonestablished Reliability, And Established Reliability, Styles Rer40, Rer45, Rer50, And Rer55
This specification covers the associated requirements for nonestablished reliability and established reliability styles RER40, RER45, RER50, and RER55 resistors. These resistors are noninductively wound.
MIL-PRF-39015 - Resistors, Variable, Wirewound, (Lead Screw Actuated), Nonestablished Reliability, And Established Reliability, General Specification For
This specification covers the general requirements for nonestablished reliability (non-ER) and established reliability (ER), lead screw actuated; wirewound variable resistors with a contact bearing uniformly over the surface of the entire resistive element, wound linearly, when positioned by a multiturn lead screw actuator. These resistors are capable of full load operation (when the maximum resistance is engaged), at a maximum temperature of 85OC and are capable for continuous operation, when properly derated, at maximum temperature of 150OC (see 3.6), with a resistance tolerance of ??5 percent. The ER resistors have life failure rate (FR) levels ranging from 1.0 percent to 0.001 percent per 1,000 hours (see 1.2.1.4). These FR levels are established at a 60 percent confidence level on the basis of life tests.
MIL-PRF-39015/1 - Resistors, Variable, Wire-Wound (Lead-Screw Actuated), Nonestablished Reliability And Established Reliability Style Rtr12
This specification covers the associated requirements for style RTR12, lead-screw actuated, wire-wound, variable resistors. The resistors are available in a ??5 percent resistance tolerance and terminal types L, P, and Y.
MIL-PRF-39015/2 - Resistors, Variable, Wire-Wound (Lead-Screw Actuated), Nonestablished Reliability And Established Reliability Style Rtr22
This specification covers the associated requirements for style RTR22, lead-screw actuated, wire-wound, variable resistors. The resistors are available in a ??5 percent resistance tolerance and terminal types L (inactive for new design), P, W, and X.
MIL-PRF-39015/3 - Resistors, Variable, Wire-Wound (Lead-Screw Actuated), Nonestablished Reliability And Established Reliability Style Rtr24
This specification covers the associated requirements for style RTR24, lead-screw actuated, wire-wound, variable resistors. The resistors are available in a ??5 percent resistance tolerance and terminal types L, P, W, and X.
MIL-PRF-39017 - Resistors, Fixed, Film (Insulated), Nonestablished Reliability, And Established Reliability, General Specification For
This specification covers the general requirements for nonestablished reliability (non-ER) and established reliability (ER), insulated, film, fixed resistors. These resistors are capable of full load operation at an ambient temperature of 70 Degrees C and have a resistance temperature characteristic of 100 parts per million (PPM) and 350 PPM per degree Celsius (PPM/Degrees C). The ER resistors have life failure rate (FR) levels ranging from 1.0 percent to 0.001 percent per 1,000 hours (see 1.2.1.4). These FR levels are established at a 60 percent confidence level on the basis of life tests. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.13.2).
MIL-PRF-39017/1 - Resistors, Fixed, Film (Insulated), Nonestablished Reliability, And Established Reliability, Style Rlr07
This specification covers the associated requirements for style RLR07, nonestablished reliability and established reliability, insulated, film, fixed resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.4).
MIL-PRF-39017/2 - Resistors, Fixed, Film (Insulated), Nonestablished Reliability, And Established Reliability, Style Rlr20
This specification covers the associated requirements for style RLR20, nonestablished reliability and established reliability, insulated, film, fixed resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.4).
MIL-PRF-39017/3 - Resistors, Fixed, Film (Insulated), Nonestablished Reliability, And Established Reliability, Style Rlr32
This specification covers the associated requirements for style RLR32, nonestablished reliability and established reliability, insulated, film, fixed resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.4)
MIL-PRF-39017/5 - Resistors, Fixed, Film, (Insulated), Nonestablished Reliability, And Established Reliability, Style Rlr05
This specification covers the associated requirements for style RLR05, nonestablished reliability and established reliability, insulated, film, fixed resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.4)
MIL-PRF-39023 - Resistors, Variable, Nonwirewound, Precision General Specification For
This specification covers the general requirements for precision, nonwirewound, variable resistors whose electrical output (in terms of percent of applied voltage) are linear or nonlinear with respect to the angular position of the operating shaft. This specification includes requirements for linear and nonlinear, single turn and multiturn, single-section (cup) and multi-section variable resistors. These resistors have a resistance tolerance of ??10 percent. These resistors are capable of full-load operation at maximum ambient temperatures of 70OC and are capable for continuous operation, when properly derated, to maximum temperatures of 125OC, (see 3.1, 6.2, and figure 10). This specification includes procedures and requirements for the acquisition of category I, category II, and category III precision resistors.
MIL-PRF-39023/1 - Resistors, Variable, Nonwirewound, Precision, Style Rq090
This specification covers the requirements for style RQ090, variable, nonwirewound, precision resistors.
MIL-PRF-39023/10 - Resistors, Variable, Nonwirewound, Precision, Style Rq051
This specification covers the requirements for style RQ051, variable, nonwirewound, precision resistors.
MIL-PRF-39023/2 - Resistors, Variable, Nonwirewound, Precision, Style Rq110
This specification covers the requirements for style RQ110, variable, nonwirewound, precision resistors.
MIL-PRF-39023/3 - Resistors, Variable, Nonwirewound, Precision, Style Rq150
This specification covers the requirements for style RQ150, variable, nonwirewound, precision resistors.
MIL-PRF-39023/4 - Resistors, Variable, Nonwirewound, Precision, Style Rq200
This specification covers the requirements for style RQ200, variable, nonwirewound, precision resistors.
MIL-PRF-39023/5 - Resistors, Variable, Nonwirewound, Precision, Style Rq300
This specification covers the requirements for style RQ300, variable, nonwirewound, precision resistors.
MIL-PRF-39023/6 - Resistors, Variable, Nonwirewound, Precision, Style Rq100
This specification covers the requirements for style RQ100, variable, nonwirewound, precision resistors.
MIL-PRF-39023/7 - Resistors, Variable, Nonwirewound, Precision, Style Rq160
This specification covers the requirements for style RQ160, variable, nonwirewound, precision resistors.
MIL-PRF-39023/8 - Resistors, Variable, Nonwirewound, Precision, Style Rq210
This specification covers the requirements for style RQ210, variable, nonwirewound, precision resistors.
MIL-PRF-39023/9 - Resistors, Variable, Nonwirewound, Precision, Style Rq091
This specification covers the requirements for style RQ091, variable, nonwirewound, precision resistors.
MIL-PRF-39035 - Resistor, Variable, Nonwirewound (Adjustment Type), Nonestablished Reliability, And Established Reliability, General Specification For
This specification covers the general requirements for nonestablished reliability (non-ER) and established reliability (ER), multiturn lead-screw actuated, and single-turn, nonwirewound, variable resistors with a contact bearing uniformly over the surface of the entire resistive element, when positioned by an actuator. These resistors are capable of full-load operation (when the maximum resistance is engaged), at a maximum temperature of 150 Degrees C, with a resistance tolerance of ??10 percent. The ER resistors will have life failure rate levels ranging from 1.0 to 0.001 percent per 1,000 hours (see 1.2.1.5). These failure rate levels are established at a 60 percent confidence level maintained at 10 percent producer's risk on the basis of the life tests.
MIL-PRF-39035/1 - Resistors, Variable, Nonwirewound (Adjustment Type, Lead-Screw Actuated), Nonestablished Reliability, And Established Reliability Style Rjr12
This specification covers the requirements for style RJR12, nonestablished reliability, and established reliability, adjustment type, lead-screw actuated, nonwirewound, variable resistors. This style is available in characteristic F.
MIL-PRF-39035/2 - Resistor, Variable, Nonwirewound (Adjustment Type, Lead-Screw Actuated), Nonestablished Reliability, And Established Reliability Style Rjr24
This specification covers the requirements for style RJR24, nonestablished reliability, and established reliability, adjustment type, lead-screw actuated, nonwirewound, variable resistors. This style is available in characteristic F. Characteristics C and H are inactive for new design.
MIL-PRF-39035/3 - Resistor, Variable, Nonwirewound (Adjustment Type, Lead-Screw Actuated), Nonestablished Reliability And Established Reliability Style Rjr26
This specification covers the requirements for style RJR26, nonestablished reliability and established reliability, adjustment type, lead-screw actuated, nonwirewound, variable resistors. This style is available in characteristic F. Characteristic H is inactive for new design.
MIL-PRF-39035/4 - Resistor, Variable, Nonwirewound (Adjustment Type, Single Turn), Nonestablished Reliability, And Established Reliability Style Rjr50
This specification covers the requirements for style RJR50, nonestablished reliability, and established reliability, adjustment type, single turn, nonwire-wound, variable resistors. This style is available in characteristic F. Characteristic H is inactive for new design.
MIL-PRF-49462 - Resistor, Fixed, Film, High Voltage General Specification For
This specification covers the general requirements for fixed, film, high voltage resistors primarily intended for incorporation into electronic circuits where high voltages and high resistance values are present.
MIL-PRF-49462/3 - Resistor, Fixed, Film, High Voltage Styles Rhv30, Rhv31, Rhv32, Rhv33, Rhv34, Rhv35
This specification covers the performance requirements for styles RHV30, RHV31, RHV32, RHV33, RHV34, and RHV35 resistors.
MIL-PRF-49465 - Resistor, Fixed, Metal Element, Power Type, Very Low Resistance Values, General Specification For
This specification covers the general requirements for power type, low value (1 ohm and below), fixed resistors (2 terminal and 4 terminal) for use in electrical, electronic, communications, and associated equipment. Included are precision resistors of ??1 percent, ??3 percent, and ??5 percent initial resistance tolerances with power ratings ranging from 3 watts to 5 watts at +25 degrees C derated to 0 power at +275 degrees C.
MIL-PRF-49465/1 - Resistor, Fixed, Metal Element, Power Type, Style Rlv10
This specification covers the performance requirements for style RLV10 metal element, power type, fixed resistors.
MIL-PRF-49465/6 - Resistor, Fixed, Metal Element, Power Type, Style Rlv30
This specification covers the performance requirements for style RLV30 metal element, power type, fixed resistors.
MIL-PRF-49465/7 - Resistor, Fixed, Metal Element, Power Type, Style Rlv31
This specification covers the performance requirements for style RLV31 metal element, power type, fixed resistors.
MIL-PRF-55182 - Resistors, Fixed, Film, Nonestablished Reliability, Established Reliability, And Space Level, General Specification For
This specification covers the general requirements for nonestablished reliability (non-ER), established reliability (ER), and space level that are hermetically or nonhermetically sealed fixed film resistors that have a high degree of stability with respect to time under severe environmental conditions. ER resistors have failure rates (FR) that are established at 60 percent confidence ranging from 0.001 percent per 1,000 hours to 1.0 percent per 1,000 hours. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.10).
MIL-PRF-55182/1 - Resistors, Fixed, Film, Nonestablished Reliability, Established Reliability, And Space Level, Style Rn*55 1/
This specification covers the associated requirements for style RN*55 1/, nonestablished reliability, established reliability, and space level, film, fixed resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.4).
MIL-PRF-55182/10 - Resistors, Fixed, Film, Nonestablished Reliability, Established Reliability, And Space Level, Style Rn*75 1/
This specification covers the associated requirements for style RN*75 1/, nonestablished reliability, established reliability, and space level, fixed, film, resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.4).
MIL-PRF-55182/13 - Resistors, Fixed, Film, Nonestablished Reliability, Established Reliability, And Space Level, Style Rn*77
This specification covers the associated requirements for style RN*77, nonestablished reliability, established reliability, and space level, fixed, film, resistors.
MIL-PRF-55182/2 - Resistors, Fixed, Film, Nonestablished Reliability, Established Reliability, And Space Level, Style Rn*57 1/
This specification covers the associated requirements for style RN*57 1/, nonestablished reliability, established reliability, and space level, film, fixed resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.3).
MIL-PRF-55182/3 - Resistors, Fixed, Film, Nonestablished Reliability, Established Reliability, And Space Level, Style Rn*60 1/
This specification covers the associated requirements for style RN*60 1/, nonestablished reliability, established reliability, and space level, film, fixed resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.4).
MIL-PRF-55182/5 - Resistors, Fixed, Film, Nonestablished Reliability, Established Reliability, And Space Level, Style Rn*65 1/
This specification covers the associated requirements for style RN*65 1/, nonestablished reliability, established reliability, and space level, film, fixed resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.4).
MIL-PRF-55182/6 - Resistors, Fixed, Film, Nonestablished Reliability, Established Reliability, And Space Level, Style Rn*70 1/
This specification covers the associated requirements for style RN*70 1/, nonestablished reliability, established reliability, and space level, film, fixed resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.4).
MIL-PRF-55182/7 - Resistors, Fixed, Film, Nonestablished Reliability, Established Reliability, And Space Level, Style Rn*50 1/
This specification covers the associated requirements for style RN*50 1/, nonestablished reliability, established reliability, and space level, film, fixed resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.4).
MIL-PRF-55182/9 - Resistors, Fixed, Film, Nonestablished Reliability, Established Reliability, And Space Level, Style Rn*90 1/
This specification covers the associated requirements for style RN*90 1/, nonestablished reliability, established reliability, and space level, fixed, film, resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.9).
MIL-PRF-55342 - Resistors, Chip, Fixed, Film, Nonestablished Reliability, Established Reliability, Space Level, General Specification For
This specification covers the general requirements for nonestablished reliability (non-ER), established reliability (ER), and space level, fixed, film, chip resistors primarily intended for incorporation into surface mount and hybrid circuit applications. These resistors have a high degree of stability with respect to time under normal conditions. ER resistors covered by this specification have life failure rates (FR) ranging from 1 percent to 0.001 percent per 1,000 hours (see 1.2.7). These FRs are established at 60 percent confidence on the basis of life tests. Table I provides a summary of performance characteristics for these resistors. Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.7).
MIL-PRF-55342/1 - Resistors, Chip, Fixed, Film, Nonestablished Reliability, Established Reliability, Space Level, Style Rm0502
This specification covers the requirements for style RM0502, fixed, film, chip, nonestablished reliability, established reliability, and space level resistors. This style is available in characteristic H, characteristic E, characteristic K, characteristic L, and characteristic M, resistance tolerances .1 percent, .25 percent, .5 percent, 1 percent, 2 percent, 5 percent, and 10 percent, and all termination materials. Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.5).
MIL-PRF-55342/2 - Resistors, Chip, Fixed, Film, Nonestablished Reliability, Established Reliability, Space Level, Style Rm0505
This specification covers the requirements for style RM0505, fixed, film, chip, nonestablished reliability, established reliability, and space level resistors. This style is available in characteristic H, characteristic E, characteristic K, characteristic L, and characteristic M, resistance tolerances .1 percent, .25 percent, .5 percent, 1 percent, 2 percent, 5 percent, and 10 percent, and all termination materials. . Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.5).
MIL-PRF-55342/3 - Resistors, Chip, Fixed, Film, Nonestablished Reliability, Established Reliability, Space Level, Style Rm1005
This specification covers the requirements for style RM1005, fixed, film, chip, nonestablished reliability, established reliability, and space level resistors. This style is available in characteristic H, characteristic E, characteristic K, characteristic L, and characteristic M, resistance tolerances .1 percent, .25 percent, .5 percent, 1 percent, 2 percent, 5 percent, and 10 percent, and all termination materials. . Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.5).
MIL-PRF-55342/4 - Resistors, Chip, Fixed, Film, Nonestablished Reliability, Established Reliability, Space Level, Style Rm1505
This specification covers the requirements for style RM1505, fixed, film, chip, nonestablished reliability, established reliability, and space level resistors. This style is available in characteristic H, characteristic E, characteristic K, characteristic L, and characteristic M, resistance tolerances .1 percent, .25 percent, .5 percent, 1 percent, 2 percent, 5 percent, and 10 percent, and all termination materials. Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.5).
MIL-PRF-55342/5 - Resistors, Chip, Fixed, Film, Nonestablished Reliability, Established Reliability, Space Level, Style Rm2208
This specification covers the requirements for style RM2208, fixed, film, chip, nonestablished reliability, established reliability, and space level resistors. This style is available in characteristic H, characteristic E, characteristic K, characteristic L, and characteristic M, resistance tolerances .1 percent, .25 percent, .5 percent, 1 percent, 2 percent, 5 percent, and 10 percent, and all termination materials. Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.5).
MIL-PRF-55342/6 - Resistors, Chip, Fixed, Film, Nonestablished Reliability, Established Reliability, Space Level, Style Rm0705
This specification covers the requirements for style RM0705, fixed, film, chip, nonestablished reliability, established reliability, and space level resistors. This style is available in characteristic H, characteristic E, characteristic K, characteristic L, and characteristic M, resistance tolerances .1 percent, .25 percent, .5 percent, 1 percent, 2 percent, 5 percent, and 10 percent, and all termination materials. Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.5).
MIL-PRF-55342/8 - Resistors, Chip, Fixed, Film, Nonestablished Reliability, Established Reliability, Space Level, Style Rm2010
This specification covers the requirements for style RM2010, fixed, film, chip, nonestablished reliability, established reliability, and space level resistors. This style is available in characteristic H, characteristic E, characteristic K, characteristic L, and characteristic M, resistance tolerances .1 percent, .25 percent, .5 percent, 1 percent, 2 percent, 5 percent, and 10 percent, and all termination materials. Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.5).
MIL-PRF-55342/9 - Resistors, Chip, Fixed, Film, Nonestablished Reliability, Established Reliability, Space Level Style Rm2512
This specification covers the requirements for style RM2512, fixed, film, chip, nonestablished reliability, established reliability, and space level resistors. This style is available in characteristic H, characteristic E, characteristic K, characteristic L, and characteristic M, resistance tolerances .1 percent, .25 percent, .5 percent, 1 percent, 2 percent, 5 percent, and 10 percent, and all termination materials. Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.5).
MIL-PRF-83401/1 - Resistor Network, Fixed, Film, Style Rz010, 14 Pin Dip
This specification covers the associated requirements for style RZ010, 14 pin dual-in-line package (DIP) resistor networks. This style is available in all characteristics and resistance tolerances. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number and a nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/10 - Resistor Network, Fixed, Film Style Rz100, 16 Pin Flat Pack
This specification covers the associated requirements for style RZ100, 16 pin flat pack resistor networks. This style is available in characteristics H, K, and M and resistance tolerances B, D, F, G, and J. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number and a nonburn in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/13 - Resistor Network, Fixed, Film, Style Rz130, 14 Pin Dip
This specification covers the associated requirements for style RZ130, 14 pin dual-in-line package (DIP) resistor networks. This style is available in all characteristics and all resistance tolerances. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/14 - Resistor Network, Fixed, Film, Style Rz140, 16 Pin Dip
This specification covers the associated requirements for style RZ140, 16 pin dual-in-line package (DIP) resistor networks. This style is available in all characteristics and all resistance tolerances. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/15 - Resistor Network, Fixed, Film, Style Rz150, 14 Pin Flat Pack
This specification covers the associated requirements for style RZ150, 14 pin flat pack resistor networks. This style is available in all characteristics and all resistance tolerances. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/16 - Resistor Network, Fixed, Film, Style Rz160, 6 Pin Sip
This specification covers the associated requirements for style RZ160, 6 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and resistance tolerances of F, G, and J. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C".
MIL-PRF-83401/17 - Resistor Network, Fixed, Film, Style Rz170, 8 Pin Sip
This specification covers the assoicated requirements for style RZ170, 8 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and resistance tolerances of F, G, and J. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C".
MIL-PRF-83401/18 - Resistor Network, Fixed, Film Style Rz180, 6 Pin Sip
This specification covers the associated requirements for style RZ180, 6 pin single in-line package (SIP) resistor network. This style is available in characteristic K and resistance tolerance G. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number and a nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/19 - Resistor Network, Fixed, Film Style Rz190, 8-Pin Sip
This specification covers the associated requirements for style RZ190, 8-pin single-in-line package (SIP) resistor network. This style is available in characteristic K and resistance tolerances of G. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number and a nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/2 - Resistor Network, Fixed, Film, Style Rz020, 16 Pin Dip
This specification covers the associated requirements for style RZ020, 16 pin dual-in-line package (DIP) resistor networks. This style is available in all characteristics and resistance tolerances. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number and a nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/20 - Resistor Network, Fixed, Film, Style Rz200, 10 Pin Sip
This specification covers the associated requirements for style RZ200, 10 pin single-in-line package (SIP) resistor networks, This style is available in all characteristics and resistance tolerance of F, G, and J. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C".
MIL-PRF-83401/21 - Resistor Network, Fixed, Film, Style Rz210, 6 Pin Sip
This specification covers the associated requirements for style RZ210, 6 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and all resistance tolerances. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/22 - Resistor Network, Fixed, Film, Style Rz220, 8 Pin Sip
This specification covers the associated requirements for style RZ220, 8 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and all resistance tolerances. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/23 - Resistor Network, Fixed, Film, Style Rz230, 10 Pin Sip
This specification covers the associated requirements for style RZ230, 10 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and all resistance tolerances. This specification has two product levels, a high reliability, 100 percent 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/24 - Resistor Network, Fixed, Film, Style Rz240, 10 Pin Sip
This specification covers the associated requirements for style RZ240, 10 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and all resistance tolerances. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/3 - Resistor Network, Fixed, Film, Style Rz030, 14 Pin Flat Pack
This specification covers the associated requirements for style RZ030, 14 pin flat pack resistor networks. This style is available in all characteristics and resistance tolerances. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number and a nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/4 - Resistor Network, Fixed, Film, Style Rz040, 6 Pin Sip
This specification covers the associated requirements for style RZ040, 6 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and resistance tolerances of F, G, and J. This specification has two product levels, a high reliability burn-in screened "M" part number and a nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/5 - Resistor Network, Fixed, Film, Style Rz050, 8 Pin Sip
This specification covers the associated requirements for style RZ050, 8 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and resistance tolerances of F, G, and J. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/6 - Resistor Network, Fixed, Film Style Rz060, 10 Pin Sip
This specification covers the associated requirements for style RZ060, 10 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and resistance tolerances of F, G, and J. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/7 - Resistor Network, Fixed, Film Style Rz070, 6 Pin Sip
This specification covers the associated requirements for style RZ070, 6 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and all resistance tolerances. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/8 - Resistor Network, Fixed, Film Style Rz080, 8 Pin Sip
This specification covers the associated requirements for style RZ080, 8 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and all resistance tolerances. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83401/9 - Resistor Network, Fixed, Film, Style Rz090, 10 Pin Sip
This specification covers the associated requirements for style RZ090, 10 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and all resistance tolerances. This specification has two product levels, a high reliability, 100 percent burn-in screened "M" part number level and nonburn-in screened part number "C". Designers are CAUTIONED on using these resistors in high power pulses applications (see 6.4).
MIL-PRF-83530 - Resistors, Voltage Sensitive (Varistor, Metal-Oxide), General Specification For
This specification covers the general requirements for voltage sensitive resistors (varistors) to be used for suppressing transients in electronic circuitry.
MIL-PRF-83530/1 - Resistors, Voltage Sensitive (Varistors) Style Rvs10
This specification covers the detail requirements for style RVS10 varistors.
MIL-PRF-914 - Resistor Networks, Fixed, Film, Surface Mount, Nonestablished Reliability, And Established Reliability, General Specification For
This specification covers the general requirements for nonestablished reliability (non-ER) and established reliability (ER), hermetically sealed (see 3.27) and nonhermetically sealed networks (see 3.27.1). These networks consist entirely of fixed, film resistors. They are primarily intended for use in surface mount applications where space is a major concern. ER resistors covered by this specification will have life failure rates (FR) ranging from 1 percent to 0.001 percent per 1,000 hours (see 1.2.1.7). The ER FR are established at a minimum 60-percent confidence level on the basis of life tests. Designers are CAUTIONED on using these resistors in pulse applications (see 6.4.4).
MIL-PRF-914/1 - Resistor Network, Fixed, Film, Surface Mount, 14-Pin, Small Outline, Nonestablished Reliability And Established Reliability, Style Rns010
MIL-PRF-914/2 - Resistor Network, Fixed, Film, Surface Mount, 16-Pin, Small Outline, Nonestablished Reliability And Established Reliability, Style Rns020
MIL-PRF-914/3 - Resistor Network, Fixed, Film, Surface Mount, 16-Pin, Leadless Chip Carrier, Nonestablished Reliability And Established Reliability, Style Rns030
This specification covers the associated requirements for RNS030 resistor networks. Resistors covered by this specification are considered a monolithic design or wire bond and die construction. The established reliability (ER) and nonestablished reliability (non-ER) styles are available in all characteristics, and resistance tolerances. Designers are CAUTIONED on using these resistors in pulse applications (see 6.6).
MIL-PRF-914/4 - Resistor Network, Fixed, Film, Surface Mount, 20-Pin, Leadless Chip Carrier, Nonestablished Reliability And Established Reliability, Style Rns040
This specification covers the detail requirements for RNS040 resistor networks. Resistors covered by this specification are considered a monolithic design or wire bond and die construction. The established reliability (ER) and nonestablished reliability (non-ER) styles are available in all characteristics and resistance tolerances. Designers are CAUTIONED on using these resistors in pulse applications (see 6.6).
MIL-PRF-914/5 - Resistor Network, Fixed, Film, Surface Mount, 16-Pin, Leadless Chip Carrier, Nonestablished Reliability And Established Reliability, Style Rns050
This specification covers the associated requirements for RNS050 resistor networks. Resistors covered by this specification are considered a monolithic design or wire bond and die construction. The established reliability (ER) and nonestablished reliability (non-ER) styles are available in all characteristics and resistance tolerances. Designers are CAUTIONED on using these resistors in pulse applications (see 6.6).
MIL-PRF-94 - Resistors, Variable, Composition General Specification For
This specification covers the variable resistors having a composition resistance element shaped in an arc, and a contact bearing uniformly thereon, so that a change in resistance is produced between the terminal of the contact and the terminal of either end of the resistance element when the operating shaft is turned. These resistors are capable of full load operation (where maximum resistance is engaged) at a maximum ambient temperature of 70 degrees C and are capable for continuous operation when properly derated, at a maximum temperature of 120 degrees C (see 6.9).
MIL-PRF-94/2 - Resistors, Variable, Composition, Style Rv5
This specification covers the requirements for style RV5 composition, variable resistors.
MIL-PRF-94/3 - Resistors, Variable, Composition, Style Rv6
This specification covers the requirements for style RV6 composition, variable resistors.
MIL-PRF-94/4 - Resistors, Variable, Composition, Style Rv2
This specification covers the requirements for style RV2 composition, variable resistors.
MIL-PRF-94/5 - Resistors, Variable, Composition, Style Rv4
This specification covers the requirements for style RV4 composition, variable resistors.
MIL-PRF-94/6 - Resistors, Variable, Composition, Style 2Rv7
This specification covers the detail requirements for style 2RV7 composition, variable, dual (2 ganged) resistor.
MIL-R-10509 - Resistors, Fixed, Film (High Stability) General Specification For
This specification covers the general requirements for high-stability, film, fixed resistors that are relatively stable with respect to time under environmental condition
MIL-R-10509/1 - Resistors, Fixed, Film (High Stability), Style Rn60
This specification covers the requirements for style RN60, high stability, film, fixed, resistors. This style is available in characteristics C, D, E and G.
MIL-R-10509/10 - Resistor, Fixed, Film (High Stability) Style Rn60 - - - Tx (Use Mil-R-55182/3)
MIL-R-10509/11 - Resistor, Fixed, Film (High Stability) Style Rn65 --- Tx (S/S By Mil-R-55182/5 Now Mil-Prf-55182/5)
MIL-R-10509/12 - Resistor, Fixed, Film (High Stability) Style Rn70 - - - Tx (Use Mil-R-55182/6)030177
MIL-R-10509/13 - Resistors, Fixed, Film (High Stability) Style Rn75---Tx
This specification covers the detailed requirements for high-stabilitity, film, fixed resistors designated Style RN/5---TX.
MIL-R-10509/14 - Resistor, Fixed, Film (High Stability) Style Rn80---Tx
This specification covers the detail requirements for high-stability, film, fixed resistors designated Style RN80---TX.
MIL-R-10509/2 - Resistors, Fixed, Film (High Stability), Style Rn65
This specification covers the requirements for style RN65, high stability, film, fixed, resistors. This style is available in characteristics C, D, E, F and G.
MIL-R-10509/3 - Resistors, Fixed, Film (High Stability), Style Rn70
This specification covers the requirements for style RN70, high stability, film, fixed, resistors. This style is available in characteristics C, D, E, F and G.
MIL-R-10509/4 - Resistor, Fixed, Film (High Stability) Style Rn-72
MIL-R-10509/5 - Resistors, Fixed, Film (High Stability), Style Rn75
This specification covers the detail requirements for style RN70, high-stability, film, fixed resistors. This style is available in all characteristics except B, C, E and G.
MIL-R-10509/6 - Resistors, Fixed, Film, (High Stability) Style Rn80
MIL-R-10509/7 - Resistors, Fixed, Film (High Stability), Style Rn55
This specification covers the requirements for style RN55, high stability, film, fixed, resistors. This style is available in characteristics C, D, E and G.
MIL-R-10509/8 - Resistors, Fixed, Film (High Stability), Style Rn50
This specification covers the requirements for style RN50, high stability, film, fixed, resistors. This style is available in characteristics C and E.
MIL-R-10509/9 - Resistor, Fixed, Film (High Stability) Style Rn55 - - - - Tx (Use Mil-R-55182/1)
MIL-R-10683 - Resistor, Fixed (Composition Film, Very High Frequency) (Use Mil-R-22684)
MIL-R-10683/1 - Resistor, Fixed (Composition Film, Very High Frequency), Style Rf30, 1 Watt (Use Mil-R-22684/3)
MIL-R-10683/2 - Resistor, Fixed (Composition Film, Very High Frequency), Style Rf31, 2 Watts (Use Mil-R-22684/4)
MIL-R-10683/3 - Resistor, Fixed (Composition Film, Very High Frequency) Style Rf40, 1/2 Watt (Use Mil-R-22684/2)
MIL-R-10683/4 - Resistors, Fixed (Composition Film, Very High Frequency), Style Rf50, 1/4 Watt (Use Mil-R-10509/1)
MIL-R-10683/5 - Resistor, Fixed (Composition Film, Very High Frequency), Style Rf51, 1 Watt (Use Mil-R-22684/3)
MIL-R-11 - Resistors, Fixed, Composition (Insulated), General Specification For (See Notice 2 For Replacement Information)
This specification covers the general requirement for insulated, fixed, resistors, having a composition resistance element consisting of a mixture of carbon, insulating material, and suitable binders, either molded together or applied as a thin layer of conducting material on an insulated form.
MIL-R-11/1 - Resistor, Fixed, Composition (Insulated), Style Rc08 (Use Mil-R-39017/5 And Mil-R-39008/4)
MIL-R-11/10 - Resistor, Fixed, Composition (Insulated), Style Rc06 (Use Mil-R-11/11
MIL-R-11/11 - Resistors, Fixed, Composition (Insulated), Style Rc05 (See Notice 3 For Replacement Information)
This specification covers the detail requirements for style RC05 resistor.
MIL-R-11/2 - Resistor, Fixed, Composition (Insulated), Style Rc09
MIL-R-11/3 - Resistors, Fixed, Composition (Insulated), Style Rc20 (See Notice 3 For Replacement Information)
This specification covers the detail requirements for style RC20 resistor.
MIL-R-11/4 - Resistor, Fixed, Composition (Insulated), Style Rc22 (Use Mil-R-39017/2 And Mil-R-39008/2
MIL-R-11/5 - Resistors, Fixed, Composition (Insulated), Style Rc30
MIL-R-11/6 - Resistors, Fixed, Composition (Insulated) Style Rc32 (See Notice 3 For Replacement Information)
This specification covers the detail requirements for style RC32 resistor.
MIL-R-11/7 - Resistor, Fixed, Composition (Insulated), Style Rc42 (See Notice 3 For Replacement Information)
This specification covers the detail requirements for style RC42 resistor.
MIL-R-11/8 - Resistor, Fixed, Composition (Insulated), Style Rc07 (See Notice 3 For Replacement Information)
This specification covers the detail requirements for style RC07 resistor.
MIL-R-11/9 - Resistor, Fixed, Composition (Insulated) Style Rc12 (Use Mil-R-39017/1 And Mil-R-39008/1)
MIL-R-11804 - Resistors, Fixed, Film (Power Type), General Specification For
MIL-R-11804/1 - Resistors, Fixed, Film (Power Type), Styles Rd31, Rd33, Rd35, Rd37, And Rd39
MIL-R-11804/2 - Resistors, Fixed, Film (Power Type), Styles Rd60, Rd65, And Rd70
MIL-R-122/11 - Resistor, Fixed, Wire Wound, Precision, Hermetically Sealed, Established Reliability, Style Rfp11
MIL-R-122/12 - Resistor, Fixed, Wire Wound, Precision, Hermetically Sealed, Established Reliability, Style Rfp12
MIL-R-122/13 - Resistor, Fixed, Wire Wound, Precision, Hermetically Sealed, Established Reliability, Style Rfp13
MIL-R-122/14 - Resistor, Fixed, Wire Wound, Precision, Hermetically Sealed, Established Reliability, Style Rfp14
MIL-R-122/15 - Resistors, Fixed, Wire-Wound, Precision, Hermetically Sealed, Established Reliability, Style Rfp15
MIL-R-122/16 - Resistors, Fixed, Wire-Wound, Precision, Hermetically Sealed, Established Reliability Style Rfp16
MIL-R-122/17 - Resistor, Fixed, Wire Wound, Precision, Hermetically Sealed, Established Reliability, Style Rfp17
MIL-R-122/18 - Resistor, Fixed, Wire Wound, Precision, Hermetically Sealed, Established Reliability, Style Rfp18
MIL-R-122/2 - Resistor, Fixed, Film, Precision, Hermetically Sealed, Established Reliability, Style Rfp02
MIL-R-122/4 - Resistor, Fixed, Film, Precision, Established Reliability, Style Rfp04
MIL-R-122/5 - Resistors, Fixed, Film, Precision, Established Reliability, Style Rfp05
This specification covers the detail requirements for established reliability, precision, film, fixed resistors.
MIL-R-122/6 - Resistors, Fixed, Film, Precision, Established Reliability, Style Rfp06
This specification covers the detail requirements for established reliability, precision, film, fixed resistors.
MIL-R-122/7 - Resistors, Fixed, Film, Precision, Established Reliability, Style Rfp07
MIL-R-122/8 - Resistor, Fixed, Wire Wound, Precision, Established Reliability, Style Rfp08
MIL-R-122/9 - Resistor, Fixed, Wire Wound, Precision, Hermetically Sealed, Established Reliability, Style Rfp09
MIL-R-12934/11 - Resistor, Variable, Wire-Wound, Precision, Style Rr1001
MIL-R-12934/12 - Resistor, Variable, Wire-Wound, Precision, Style Rr2101
MIL-R-12934/13 - Resistor, Variable, Wire-Wound, Precision, Style Rr2102
MIL-R-12934/14 - Resistor, Variable, Wire-Wound, Precision, Style Rr2103
MIL-R-12934/21 - Resistor, Variable, Wire-Wound, Precision, Style Rr1401
MIL-R-12934/22 - Resistor, Variable, Wire-Wound, Precision, Style 2Rr2001
MIL-R-12934/23 - Resistor, Variable, Wire-Wound, Precision, Style Rr1003
MIL-R-12934/24 - Resistor, Variable, Wire-Wound, Precision, Style Rr1002
MIL-R-12934/25 - Resistor, Variable, Wirewound, Precision, Style Rr3001
MIL-R-12934/26 - Resistor, Variable, Wire-Wound, Precision, Style 5Rr1301
MIL-R-12934/3 - Resistor, Variable, Wire-Wound, Precision, Style Rr1500 Use Mil-R-12934/19
MIL-R-12934/7 - Resistor, Variable, Wirewound, Precision, Style Rr1200
MIL-R-12934/8 - Resistor, Variable, Wirewound, Precision, Style Rr1600 (Use Mil-R-12934/20)
MIL-R-12944 - Resistor, Radio Interference Suppression, For Ignition Systems
MIL-R-14205 - Resistors, Fixed, Non-Wirewound (High Temperature Power Type) (Use Mil-R-11804/1 Or Mil-R-11804/2)
MIL-R-14262 - Resistors, Fixed, Wirewound(Accurate, High Temperature).
MIL-R-14293 - Resistor, Fixed, High Megohm (Hermetically Sealed)
MIL-R-18546/1 - Resistors, Fixed, Wire-Wound (Power Type, Chassis Mounted), Styles Re60, Re65, Re70, And Re75
This specification covers the requirements for styles RE60, RE65, RE70, and RE75 resistors.
MIL-R-19074 - Resistor, Fixed, Film, Accurate (S/S By Mil-R-10509)
MIL-R-19365 - Resistor, Adjustable, Wirewound, Power
This specification covers power, adjustable, wirewound, resistors for use in electrical, electronic, communication, and associated equipment. These resistors have a resistance range of 1 ohm to 15,000 ohms, inclusive, and a resistance tolerance of -�5 percent. The power ratings cover a range of 11 watts to 210 watts, inclusive. These power ratings are applicable only when the maximum resistance is engaged in the circuit. When only a portion of the resistance element is engaged, the power rating is reduced in approximately the same proportion as the resistance.
MIL-R-19438 - Resistor, Variable, Wire Wound, Precision
MIL-R-19518 - Resistors, Variable, Wirewound, Precision (S/S By Mil-R-12934)
MIL-R-21202 - Resistor Assembly, Molded (For Infrared Viewers R-556 And R-556A/Sar-4)
MIL-R-22526 - Resistor, Variable
MIL-R-22684/1 - Resistors, Fixed, Film, Insulated, Style Rl07
This specification covers the associated requirements for insulated, film, fixed resistors of 2-percent and 5-percent resistance tolerance. These resistors are capable of full-load operation at an ambient temperature of 70 degrees C and have a resistance-temperature characteristic of +200 parts per million per degree Celsius (ppm/degrees C). Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.3).
MIL-R-22684/2 - Resistors, Fixed, Film, Insulated, Style Rl20
This specification covers the associated requirements for insulated, film, fixed resistors of 2-percent and 5-percent resistance tolerance. These resistors are capable of full-load operation at an ambient temperature of 70 Deg. C and have a resistance-temperature characteristic of plus/minus 200 parts per million per degree Celsius (ppm/Deg. C).
MIL-R-22684/3 - Resistors, Fixed, Film, Insulated, Style Rl32
This specification covers the associated requirements for insulated, film, fixed resistors of 2-percent and 5-percent resistance tolerance. These resistors are capable of full-load operation at an ambient temperature of 70 degrees C and have a resistance-temperature characteristic of +200 parts per million per degree Celsius (ppm/degrees C). Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.3).
MIL-R-22684/4 - Resistors, Fixed, Film, Insulated, Style Rl42
This specification covers the associated requirements for insulated, film, fixed resistors of 2-percent and 5-percent resistance tolerance. These resistors are capable of full-load operation at an ambient temperature of 70 degrees C and have a resistance-temperature characteristic of +200 parts per million per degree Celsius (ppm/degrees C). Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.3).
MIL-R-22684/5 - Resistor, Fixed, Film, Insulated Style Rlo7 Tx
MIL-R-22684/6 - Resistor, Fixed, Film, Insulated Style Rl20Tx
MIL-R-22684/7 - Resistor, Fixed, Film, Insulated Style Rl32 Tx (Use Mil-R-39017/3)
MIL-R-23285/1 - Resistors, Variable, Metal Film, Nonwirewound, Style Rvc4
MIL-R-23285/2 - Resistors, Variable, Nonwire-Wound, Style Rvc5
MIL-R-23379 - Resistor, Fixed, Wirewound, Precision, Power Type, Wire Lead Terminal, General Specification For (Navy) (S/S By Mil-R-26/5
MIL-R-23379/1 - Resistors, Fixed, Wirewound, Precision, Power Type, Wire Lead Terminal, Style Rwp 18 (Use Mil-R-26/5)
MIL-R-23379/2 - Resistors, Fixed, Wirewound, Precision, Power Type, Wire Lead Terminal, Style Rwp20 (Use Mil-R-26/5)
MIL-R-23379/3 - Resistors, Fixed, Wirewound, Precision, Power Type, Wire Lead Terminal, Style Rwp 21 (Use Mil-R-26/5)
MIL-R-23379/4 - Resistors, Fixed, Wirewound, Precision, Power Type, Wire Lead Terminal, Style Rwp 22
MIL-R-23379/5 - Resistors, Fixed, Wirewound, Precision, Power Type Wire Lead Terminal, Style Rwp 23 (Use Mil-R-26/5)
MIL-R-23379/6 - Resistors, Fixed, Wirewound, Precision, Power Type, Wire Lead Terminal, Style Rwp 17 (Use Mil-R-26/6)
MIL-R-23379/7 - Resistors, Fixed, Wirewound, Precision, Power Type, Wire Lead Terminal, Style Rwp 19 (Use Mil-R-26/6)
MIL-R-23648/7 - Resistor, Thermal (Thermistor), Insulated Negative Temperature Coefficient Style Rth18
MIL-R-26/1 - Resistors, Fixed, Wire-Wound (Power Type), Styles Rw10, Rw11, Rw12, Rw13, Rw14, Rw15, And Rw16
MIL-R-26/10 - Resistors, Fixed, Wirewound, (Power Type), Style Rw22 (S/S By Mil-R-26)
MIL-R-26/12 - Resistors, Fixed, Wirewound (Power-Type), Style Rw24 (S/S By Mil-R-26)
MIL-R-26/13 - Resistors, Fixed, Wirewound (Power-Type), Style Rw29 (S/S By Mil-R-26)
MIL-R-26/14 - Resistors, Fixed, Wirewound (Power-Type), Style Rw30 (S/S By Mil-P-26)
MIL-R-26/15 - Resistors, Fixed, Wirewound (Power-Type), Style Rw31 (S/S By Mil-R-26)
MIL-R-26/16 - Resistors, Fixed, Wirewound (Power-Type), Style Rw32 (S/S By Mil-R-26)
MIL-R-26/17 - Resistors, Fixed, Wirewound (Power Type), Style Rw33 (S/S By Mil-R-26)
MIL-R-26/18 - Resistors, Fixed, Wirewound, (Power-Type), Style Rw34 (S/S By Mil-R-26)
MIL-R-26/19 - Resistors, Fixed, Wirewound, (Power Type), Style Rw35 (S/S By Mil-R-26)
MIL-R-26/2 - Resistor, Fixed, Wirewound (Power Type), Styles Rw20, Rw21, Rw22, Rw23, And Rw24
This specification covers the associated requirements for styles RW20, RW21, RW22, RW23, and RW24, wirewound inductive resistors.
MIL-R-26/20 - Resistors, Fixed, Wirewound (Power-Type), Style Rw36 (S/S By Mil-R-26)
MIL-R-26/21 - Resistors, Fixed, Wirewound, (Power-Type), Style Rw37 (S/S By Mil-R-26)
MIL-R-26/22 - Resistors, Fixed, Wirewound (Power-Type), Style Rw38 (S/S By Mil-R-26)
MIL-R-26/23 - Resistors, Fixed, Wirewound (Power-Type), Style Rw39 (S/S By Mil-R-26)
MIL-R-26/24 - Resistors, Fixed, Wirewound (Power Type), Style Rw47 (S/S By Mil-R-26)
MIL-R-26/25 - Resistors, Fixed, Wirewound (Power-Type), Style Rw50 (S/S By Mil-R-26)
MIL-R-26/26 - Resistors, Fixed, Wirewound (Power-Type), Style Rw51 (S/S By Mil-R-26)
MIL-R-26/27 - Resistors, Fixed, Wirewound (Power-Type), Style Rw52 (S/S By Mil-R-26)
MIL-R-26/28 - Resistors, Fixed, Wirewound (Power-Type), Style Rw53 (S/S By Mil-R-26)
MIL-R-26/29 - Resistors, Fixed, Wirewound (Power-Type), Style Rw54 (S/S By Mil-R-26)
MIL-R-26/30 - Resistors, Fixed, Wirewound (Power-Type), Style Rw55 (S/S By Mil-R-26)
MIL-R-26/31 - Resistors, Fixed, Wirewound (Power-Type), Style Rw56 (S/S By Mil-R-26)
MIL-R-26/5 - Resistor, Fixed, Wirewound (Power Type), Styles Rw70, Rw74, Rw78, And Rw79
This specification covers the associated requirements for styles RW70, RW74, RW78, and RW79, wirewound inductive resistors.
MIL-R-26/6 - Resistor, Fixed, Wire Wound (Power Type), Styles Rw80 And Rw81
This specification covers the associated requirements for styles RW80 and RW81, wirewound inductive resistors.
MIL-R-26/7 - Resistors, Fixed, Wirewound (Power Type), Style Rw16 (S/S By Mil-R-26)
MIL-R-26/8 - Resistors, Fixed, Wirewound (Power Type), Style Rw20 (S/S By Mil-R-26)
MIL-R-26/9 - Resistors, Fixed, Wirewound (Power-Type), Style Rw21 (S/S By Mil-R-26)
MIL-R-26979 - Resisters, Variable, Wirewound (Low Operating Temperature Type Ra15 )With Information Notice 1 Dated 11May 56(
MIL-R-26980 - Resistor, Variable, Wirewound (Low Operating Temperature) Type Ra24 (With Information Notice 1 Dated 11 May 56)
MIL-R-26981 - Resistors, Variable, Wirewould (Low Operating Temperature), Type Ra40 (With Information Notice 1 Dated 11May 56)
MIL-R-26982 - Resistors, Variable, Wirewound (Low Operating Temperature) Type Ra50 (With Information Notice 1 Dated 11May 56)
MIL-R-26983 - Resistors, Variable, Wirewound (Low Operating Temperature) Type Ra-60 (With Information Notice 1 Dated 11 May 1956)
MIL-R-26984 - Resistors, Variable, Wirewound (Low Operating Temperature) Type Re75 (With Information Notice 1 Dated 11May 56)
MIL-R-27208/1 - Resistors, Variable, Trimmer Style Rtpo9
MIL-R-27208/11 - Resistors, Variable, Wire-Wound (Adjustment Type, Lead-Screw Actuated), Style Rt27
MIL-R-27208/12 - Resistor, Variable, Wir-Wound (Adjustment Type, Single Turn), Style R750
MIL-R-27208/3 - Resistor, Variable, Wire-Wound (Adjustment Type, Lead-Screw Actuated), Style Rt 11 (Use Mil-R-27208/8)
MIL-R-27208/4 - Resistor, Variable, Wirewound, Adjustment Type, Lead Screw Actuated, Style Rt22
This specification covers the requirements for style RT22 adjustment type, lead screw actuated, wirewound, variable resistors.
MIL-R-27208/5 - Resistors, Variable, Trimmer Style Rtp13
MIL-R-27208/6 - Resistors, Variable, Trimmer Style Rtp14
MIL-R-27208/7 - Resistors, Variable, Trimmer Style Rtp15
MIL-R-27232 - Resistor, Fixed Wirewound (Power Type) Styles Rw10 Thru Rw16, Rw34, Rw39 (Supeseded By Mil-R-26/1)
MIL-R-3080 - Resistors, Current-Regulating (Ballast Tubes), General Specification For
This specification covers current-regulating resistors consisting of a conductor or group of conductors, hermetically sealed in an envelope containing a suitable gas coolant under pressure, whose current or currents remain substantially constant over a given range of voltage.
MIL-R-3080/1 - Resistors, Current-Regulating (Ballast Tubes), Type Tj601K01
MIL-R-3080/10 - Resistor, Current-Regulating (Ballast Tubes), Type Tj102M01 Validated Mar 1965
MIL-R-3080/11 - Resistors, Current-Regulating (Ballast Tubes), Type Tj102L01
MIL-R-3080/12 - Resistor, Current-Regulating (Ballast Tubes), Type Tj601 M01 Validated Mar 1965
MIL-R-3080/13 - Resistor, Current-Regulating (Ballast Tubes), Type Tj421T01 Validated Mar 1965
MIL-R-3080/14 - Resistor, Current-Regulating (Ballast Tubes), Type Tj361G01 Validated Mar 1965
MIL-R-3080/15 - Resistor, Current-Regulating (Ballast Tubes), Type Tj151K01 Validated Mar 1965
MIL-R-3080/2 - Resistor, Current Regulating (Ballast Tubes) Type Tj791K01
MIL-R-3080/3 - Resistor, Current-Regulating (Ballast Tubes), Type Tj132G01 Validated Mar 1965
MIL-R-3080/4 - Resistor, Current-Regulating (Ballast Tubes), Type Tj631G01 Validated Mar 1965
MIL-R-3080/5 - Resistor, Current Regulating (Ballast Tubes) Type Tj311M01
MIL-R-3080/6 - Resistor, Current-Regulating (Ballast Tubes), Type Tj422J01 Validated Mar 1965
MIL-R-3080/7 - Resistor, Current-Regulating (Ballast Tubes), Type Tj861L01 Validated Mar 1965
MIL-R-3080/8 - Resistor, Current-Regulating (Ballast Tubes), Type Tj571R01 Validated Mar 1965
MIL-R-3080/9 - Resistor, Current-Regulating (Ballast Tubes), Type Tj301L01 Validated Mar 1965
MIL-R-38101 - Resistor, Fixed, Established Reliability (S/S By Mil-R-39007)
MIL-R-38101/1 - Resistor, Fixed, Film, 1/8 Watt, Plus/Minus 1.0 Percent Tolerance Established Reliability (S/S By Mil-R-55182/2)
MIL-R-38101/10 - Resistor, Fixed, Precision, Wirewound, 1 Watt, -/-O.1 Percent Tolerance Established Reliability (S/S By Mil-R-39005/7)
MIL-R-38101/11 - Resistor, Fixed, Precision, Wirewound, 1/4 Watt, Plus/Minus 0.02 Percent Tolerance Established Tolerance (S/S By Mil-Prf-39005/3)
MIL-R-38101/12 - Resistor, Fixed, Precision, Wirewound, Sub-Miniature, 1/8 Watt, Plus/Minus 0.01 Percent Tolerance Established Reliability (S/S By Mil-R-39005/9)
MIL-R-38101/13 - Resistor, Fix, Powder, Wirewound, Sub-Miniature, 1.0 Watt, Plus/Minus 1.0 Percent Tolerance Established Reliability (S/S By Mil-R-39007/9)
MIL-R-38101/14 - Resistor, Fixed, Power, Wirewound, Miniature, 2.25 Watt, Plus/Minus 1.0 Percent Tolerance Established Reliability (S/S By Mil-R-39007/8)
MIL-R-38101/15 - Resistor, Fixed, Power, Wirewound, Sub-Miniature, 4.0 Watt, 1.0 Percent Tolerance Established Reliability (S/S By Mil-R-39007/11)
MIL-R-38101/16 - Resistor, Fixed, Power, Wirewound, Miniature, 5.0 Watt Plus/Minus 1.0 Percent Tolerance Established Reliability (S/S By Mil-R-39007/6)
MIL-R-38101/17 - Resistor, Fixed, Power, Wirewound, Sub-Miniature, 7.0 Watt, Plus/Minus 1.0 Percent Tolerance Established Reliability (S/S By Mil-R-39007/10)
MIL-R-38101/18 - Resistor, Fixed, Power, Wirewound, Miniature, 10 Watt, Plus/Minus 1.0 Percent Tolerance Established Reliability (S/S By Mil-R-39007/7)
MIL-R-38101/19 - Resistor, Fixed, Metal Film, Subminiature, 0.1 Watt, Plus/Minus 1.0% Tolerance Established Reliability (S/S By Mil-R-5518218)
MIL-R-38101/2 - Resistor, Fixed, Power Wirewound, Miniature 2 Watt, And 1% Tolerance (Established Reliability) (S/S By Mil-R-39007/5)
MIL-R-38101/20 - Resistor, Fixed, Metal Film, Sub-Miniature, O.05 Watt, Plus/Minus 1.0 Percent Tolerance Established Reliability (S/S By Mil-55182/7)
MIL-R-38101/21 - Resistor, Fixed, Film, 1/8 Watt, Plus/Minus 2.0 Percent Tolerance Established Reliability (S/S By Mil-R-39017/1)
MIL-R-38101/22 - Resistor, Fixed, Film, 1/3 Watt, Plus/Minus 2.0 Percent Tolerance Established Reliability (S/S By Mil-R-39017/2)
MIL-R-38101/23 - Resistor, Fixed, Film, 1 Watt, Plus/Minus 2 Percent Tolerance Established Reliability (S/S By Mil-R-39017/3)
MIL-R-38101/26 - Resistor, Fixed, Film, 1/8 Watt, Pluse Or Minus 1 0 Percent Tolerance (Established Reliability) (S/S By Mil-R-55182/1)
MIL-R-38101/27 - Resistor, Fixed, Film, 1/3 Watt, Pluse Or Minus 1.0 Percent Tolerance (Established Reliability) (S/S By Mil-R-55182/3
MIL-R-38101/28 - Resistor, Fixed, Film, 1 Watt, Pulse Or Minus 1.0 Percent Tolerance (Established Reliability) (S/S By Mil-R-55182/5)
MIL-R-38101/29 - Resistor, Fixed, Film, 1/4 Watt, Plus Minus 1.0 Percent Tolerance Established Reliability (See Mil-R-55182/5)
MIL-R-38101/3 - Resistor, Fixed, Precision, Wirewound, 1 Watt &0.02% Tolerance (Established Reliability) (S/S By Mil-R-39005/7)
MIL-R-38101/30 - Resistor, Fixed, Film, 1/4 Watt, Plus Or Minus 0.1 Percent Tolerance Established Reliability (See Mil-R-55182/5)
MIL-R-38101/31 - Resistor, Fixed, Film, 1/2 Watt, Plus Or Minus 0.1 Percent Tolerance Established Reliability (See Mil-R-55182/5)
MIL-R-38101/32 - Resistor, Fixed, Film, 1/2 Watt, Plus Or Minus 0.1 Percent Tolerance Established Reliability (See Mil-R-55182/5)
MIL-R-38101/33 - Resistor, Fixed, Film, 1 Watt, Plus Minus 1.0 Percent Tolerance Established Reliability (See Mil-R-55182/5)
MIL-R-38101/34 - Resistor, Fixed, Film, 1 Watt, Plus Minus 0.1 Percent Tolerance Established Reliability
MIL-R-38101/4 - Resistor, Fixed, Precision Wirewound, 1/4 Watt And 1.0% Tolerance (Established Reliability) (S/S By Mil-Prf-39005/3)
MIL-R-38101/5 - Resistor, Fixed, Precision, Wirewound, 1/2 Watt, Plus/Minus 1.0 Percent Tolerance Established Reliability (S/S By Mil-R-39005/10)
MIL-R-38101/6 - Resistor, Fixed, Precision, Wirewound, 1 Watt, Plus/Minus 1 Percent Tolerance Established Reliability (S/S By Mil-R-39005/7)
MIL-R-38101/7 - Resistor, Fixed, Precision, Wirewound, 1/8 Watt, -/-0.1 Percent Tolerance Established Reliability (S/S By Mil-R-39005/8)
MIL-R-38101/8 - Resistor, Fixed, Precision, Wirewound, 1/4 Watt, -/-0.1 Percent Tolerance Established Reliability (S/S By Mil-Prf-39005/3)
MIL-R-38101/9 - Resistor, Fixed, Precision, Wire Wound, 1/2 Watt, Plus/Minus 0.1 Percent Tolerance Established Reliability (S/S By Mil-R-39005/10)
MIL-R-39002/2 - Resistors, Variable, Wirewound Semi-Precision, Style Rk10
MIL-R-39007/1 - Resistor, Fixed, Wirewound, (Power Type) Established Reliability Style Rwr67 (Use Mil-R-39007/6)
MIL-R-39007/2 - Resistor, Fixed, Wirewound, (Power Type) Established Reliability Style Rwr68 (Use Mil-R-39007/7)
MIL-R-39007/3 - Resistor, Fixed, Wirewound, (Power Type) Established Reliability Style Rwr69 (Use Mil-R-39007/11)
MIL-R-39007/4 - Resistor, Fixed, Wirewound, (Power Type) Established Reliability Style Rwr70 (Use Mil-R-39007/8)
MIL-R-39008 - Resistor, Fixed, Composition (Insulated), Established Reliability, General Specification For (See Notice 3 For Replacement Information)
This specification covers the general requirements for established reliability, insulated, fixed resistors having a composition resistance element consisting of a mixture of carbon, insulating material, and suitable binders, either molded together or applied as a thin layer of conducting material on an insulating form.
MIL-R-39008/1 - Resistor, Fixed, Composition (Insulated), Established Reliability, Style Rcr07 (See Notice 3 For Replacement Information)
This specification covers the detail requirements for style RCR07 resistors.
MIL-R-39008/2 - Resistors, Fixed, Composition (Insulated), Established Reliability, Style Rcr20 (See Notice 3 For Replacement Information)
This specification covers the detail requirements for style RCR20 resistors.
MIL-R-39008/3 - Resistor, Fixed, Composition (Insulated), Established Reliability, Style Rcr32 (See Notice 3 For Replacement Information)
This specification covers the detail requirements for style RCR32 resistors.
MIL-R-39008/4 - Resistor, Fixed, Composition (Insulated), Established Reliability Style Rcr05 (See Notice 3 For Replacement Information)
This specification covers the detail requirements for style RCR05 resistors.
MIL-R-39008/5 - Resistor, Fixed, Composition (Insulated), Established Reliability Style Rcr42 (See Notice 3 For Replacement Information)
This specification covers the detail requirements for style RCR42 resistor.
MIL-R-39015/4 - Resistor, Variable, Wire-Wound (Lead Screw Actuated) Established Reliability Style Rtr10
MIL-R-39015/5 - Resistor, Variable, Wire-Wound (Lead Screw Actuated), Established Reliability Style Rtr11
MIL-R-39017/4 - Resistor, Fixed, Film, (Insulated), Established Reliability, Style Rlr42 (See Notice 3 For Replacement Information))
MIL-R-39035/5 - Resistors, Variable, Nonwire-Wound (Adjustment Type, Lead-Screw Actuated), Established Reliability Style Rjr28
This specification covers the detail requirements for style RJR28, established reliability, adjustment type, lead-screw actuated, nonwire-wound, variable resistors.
MIL-R-39035/6 - Resistor, Variable, Nonwire-Wound (Adjustment Type, Lead-Screw Actuated), Established Reliability Style Rjr30 (Use Mil-R-39035/7)
MIL-R-39035/7 - Resistors, Variable, Nonwire-Wound, (Adjustment Type, Lead-Screw Actuated), Established Reliability, Style Rjr32
MIL-R-49462/1 - Resistors, Fixed, Film, High Voltage, Styles Rhv10, Rhv11, Rhv12, Rhv13, Rhv14, Rhv15, Rhv16, Rhv17, Rhv18, Rhv19, Rhv20, Rhv21
MIL-R-49462/2 - Resistors, Fixed, Film, High Voltage, Styles Rhv22, Rhv23, Rhv24, Rhv25, Rhv26, Rhv27, Rhv28, Rhv29
MIL-R-49462/4 - Resistors, Fixed, Film, High Voltage, Style Rhv36, Rhv37, Rhv38, Rhv39, Rhv40, Rhv41, Rhv42, Rhv43, Rhv44, Rhv45, Rhv46, Rhv47
MIL-R-49462/5 - Resistors, Fixed, Film, High Voltage, Styles Rhv50, Rhv51, Rhv52, Rhv53, Rhv54, Rhv55, Rhv56, Rhv57
MIL-R-49465/10 - Resistors, Fixed, Metal Element (Power Type), Style Rlv41
This specification covers the detail requirements for style RLV41 metal element, power type, fixed resistors.
MIL-R-49465/2 - Resistors, Fixed, Metal Element (Power Type) Style Rlv20
MIL-R-49465/3 - Resistors, Fixed, Metal Element (Power Type) Style Rlv21
This specification covers the detail requirements for style RLV21 metal element, power type, fixed resistor.
MIL-R-49465/4 - Resistors, Fixed, Metal Element (Power Type), Style Rlv22
This specification covers the detail requirements for style RLV22 metal element, power type, fixed resistor.
MIL-R-49465/5 - Resistors, Fixed, Metal Element (Power Type) Style Rlv23
This specification covers the detail requirements for style RLV23 metal elements, power type, fixed resistors.
MIL-R-49465/8 - Resistors, Fixed, Metal Element (Power Type), Style Rlv32
This specification covers the detail requirements for style RLV32 metal element, power type, fixed resistors.
MIL-R-49465/9 - Resistors, Fixed, Metal Element (Power Type), Style Rlv40
MIL-R-55182/11 - Resistors, Fixed, Film, Established Reliability, Style Rn*51 1/
This specification covers the requirements for style RN*51 1/, established reliability, fixed, film resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.6).
MIL-R-55182/12 - Resistors, Fixed, Film, Established Reliability, Style Rn*56 1/
This specification covers the requirements for style RN*56 1/, established reliability, fixed, film resistors. Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.6).
MIL-R-55182/4 - Resistor, Fixed, Film Established Reliability Style Rnr63 (Use Mil-R-55182/5)
MIL-R-55182/8 - Resistors, Fixed, Film, Established Reliability Style Rnr54 (S/S By Mil-R-55182/1)
MIL-R-55188 - Resistors, Fixed Film, High Stability (Microelement)
MIL-R-7498 - Rheostat, 125 Ohms, 120V, Type P&1
MIL-R-81106 - Resistors,1Variable, Wirewound, Presion, Long Life, Low Noise, General Specification For (Use Mil-R-12934)
MIL-R-81106/1 - Resistors, Variable, Wirewound, Precision, Long Life, Low Noise, Style Rr P09 (Use Mil-R-12934)
MIL-R-81106/2 - Resistor, Variable, Wire Wound, Precision, Long Life, Low Noise Style Rrp10 (Use Mil-R-12934)
MIL-R-81106/3 - Resistors, Variable, Wirewound, Precision Long Life, Low Noise, Style Rr P11 (Use Mil-R-12934)
MIL-R-81106/4 - Resistor, Variable, Wire Wound, Precision, Long Life, Low Noise, Style Rrp12 (Use Mil-R-12934)
MIL-R-81106/5 - Resistors, Variable, Wirewound, Precision Long Life, Low Noise, Style Rr P15 (Use Mil-R-12934)
MIL-R-81106/6 - Resistor, Variable, Wire Wound, Precision, Long Life, Low Noise Style Rrp16 (Use Mil-R-12934)
MIL-R-81106/7 - Resistors, Variable, Wirewound, Precision Long Life, Low Noise, Style Rr P20 (Use Mil-R-12934)
MIL-R-81106/8 - Resistor, Variable, Wire Wound, Precision, Long Life, Low Noise Style Rrp21 (Use Mil-R-12934)
MIL-R-81106/9 - Resistors, Variable, Wirewound, Precision, Long Life, Low Noise, Style Rr P30 (Use Mil-R-12934)
MIL-R-83579 - Resistors, Fixed, Wire-Wound (Power Type), High Reliability, General Specification For (S/S By Mil-Prf-39007)
MIL-R-83579/1 - Resistors, Fixed, Wire-Wound (Power Type), High Reliability, Style Rws81 (S/S By Mil-Prf-39007/9)
This specification covers the detail requirements for style RWS81, high reliability, power type, wire-wound, fixed resistor.
MIL-R-83579/2 - Resistors, Fixed, Wire-Wound (Power Type), High Reliability, Style Rws84 (S/S By Mil-Prf-39007/10)
This specification covers the detail requirements for style RWS84, high reliability, power type, wire-wound, fixed resistor.
MIL-R-83579/3 - Resistors, Fixed, Wire-Wound (Power Type), High Reliability, Style Rws89 (S/S By Mil-Prf-39007/11)
This specification covers the detail requirements for style RWS89, high reliability, power type, wire-wound, fixed resistor.
MIL-R-83580 - Resistor, Fixed, Film, Chip, Established Reliability, General Specification For (S/S By Mil-Prf-55342)
This specification covers the general requirements for fixed, film, chip resistors primarily intended for incorporation into hybrid microelectronic circuits and surface mounting applications used in space, missile and other high reliability applications.
MIL-R-83580/1 - Resistor, Fixed, Film, Chip, Established Reliability, Style Rsm0502 (S/S By Mil-Prf-55342/1)
This specification covers the detail requirements for style RSM0502, fixed, film, chip, resistors. This style is available in characteristics H, E, K, and M, resistance tolerances .1, 1, 2, and 5 percent and all termination materials except termination P.
MIL-R-83580/10 - Resistor, Fixed, Film, Chip, Established Reliability, Style Rsm1010 (S/S By Mil-Prf-55342/10)
MIL-R-83580/2 - Resistor, Fixed, Film, Chip, Established Reliability, Style Rsm0505 (S/S By Mil-Prf-55342/2)
This specification covers the detail requirements for style RSM0505, fixed, film, chip, resistors. This style is available in characteristics H, E, K, and M, resistance tolerances .1, 1, 2, and 5 percent and all termination materials.
MIL-R-83580/3 - Resistor, Fixed, Film, Chip, Established Reliability, Style Rsm1005 (S/S By Mil-Prf-55342/3)
This specification covers the detail requirements for style RSM1005, fixed film, chip, resistors. This style is available in characteristics H, E, K, and M, resistance tolerances .1, 1, 2, and 5 percent and all termination materials except termination P.
MIL-R-83580/4 - Resistor, Fixed, Film, Chip, Established Reliability, Style Rsm1505 (S/S By Mil-Prf-55342/4)
This specification covers the detail requirements for style RSM1505, fixed, film, chip, resistors. This style is available in characteristics H, E, K, and M, resistance tolerances .1, 1, 2, and 5 percent and all termination materials.
MIL-R-83580/5 - Resistor, Fixed, Film, Chip, Established Reliability, Style Rsm2208 (S/S By Mil-Prf-55342/5)
This specification covers the detail requirements for style RSM2208, fixed, film, chip, resistors. This style is available in characteristics H, E, K, and M, resistance tolerance .1, 1, 2, and 5 percent and all termination materials except termination P.
MIL-R-83580/6 - Resistor, Fixed, Film, Chip, Established Reliability, Style Rsm0705 (S/S By Mil-Prf-55342/6)
This specification covers the detail requirements for style RSM0705, fixed, film, chip, resistors. This style is available in characteristics H, E, K, and M, resistance to tolerances .1, 1, 2, and 5 percent and all termination materials except termination P.
MIL-R-83580/7 - Resistor, Fixed, Film, Chip, Established Reliability, Style Rsm1206 (S/S By Mil-Prf-55342/7)
This specification covers the detail requirements for style RSM1206, fixed, film, chip, resistors. This style is available in characteristics H, E, K, and M, resistance tolerances .1, 1, 2, and 5 percent and all termination materials except termination P.
MIL-R-83580/8 - Resistor, Fixed, Film, Chip, Established Reliability, Style Rsm2010 (S/S By Mil-Prf-55342/8)
This specification covers the detail requirements for style RSM2010, fixed, film, chip, resistors. This style is available in characteristics H, E, K, and M, resistance tolerance .1, 1, 2, and 5 percent and all termination materials except termination P.
MIL-R-83580/9 - Resistor, Fixed, Film, Chip, Established Reliability, Style Rsm2512 (S/S By Mil-Prf-55342/9)
MIL-R-87254 - Resistor, Fixed, Film, High Reliability General Specification For (S/S By Mil-Prf-55182)
This specification covers the general requirements for hermetically sealed (see 3.12) and nonhermetically sealed (see 3.12.1) high reliability, fixed, film resistors for space, missile and other high reliability applications.
MIL-R-87254/1 - Resistors, Fixed, Film, High Reliability, Style Rsc50 (S/S By Mil-Prf-55182/7)
MIL-R-87254/2 - Resistor, Fixed, Film, High Reliability, Style Rsc55 (S/S By Mil-Prf-55182/1)
MIL-R-87254/3 - Resistor, Fixed, Film, High Reliability, Style Rsc60 (S/S By Mil-Prf-55182/3)
MIL-R-87254/4 - Resistor, Fixed, Film, High Reliability, Style Rsc65 (S/S By Mil-Prf-55182/5)
MIL-R-87254/5 - Resistor, Fixed, Film, High Reliability, Style Rsc90 (S/S By Mil-Prf-55182/9)
MIL-R-874 - Resistor Networks, Fixed, Film, Established Reliability, General Specification For
MIL-R-874/1 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr10, 14 Pin Dip
MIL-R-874/10 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr95, 16 Pin Flat Pack
MIL-R-874/11 - Resistor Network, Fixed, Film, Established Reliability, Style, Rzr11, 14 Pin Dip
MIL-R-874/12 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr21, 16 Pin Dip
MIL-R-874/13 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr31, 14 Pin Flat Pack
MIL-R-874/14 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr41, 6 Pin Sip
MIL-R-874/15 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr51, 8 Pin Sip
MIL-R-874/16 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr61, 10 Pin Sip
MIL-R-874/17 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr71, 6 Pin Sip
This specification covers the detail requirements for style RZR71, 6 pin single in-line package (SIP) resistor network.
MIL-R-874/18 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr81, 8 Pin Sip
MIL-R-874/19 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr91, 10 Pin Sip
MIL-R-874/2 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr20, 16 Pin Dip
MIL-R-874/20 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr96, 16 Pin Flat Pack
MIL-R-874/3 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr30, 14 Pin Flat Pack
MIL-R-874/4 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr40, 6 Pin Sip
MIL-R-874/5 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr50, 8 Pin Sip
MIL-R-874/6 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr60, 10 Pin Sip
This specification covers the detail requirements for style RZR60, 10 pin single in-line package (SIP) resistor network.
MIL-R-874/7 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr70, 6 Pin Sip
MIL-R-874/8 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr80, 8 Pin Sip
MIL-R-874/9 - Resistor Network, Fixed, Film, Established Reliability, Style Rzr90, 10 Pin Sip
MIL-R-8781 - Resistors, Fixed, Wirewound, Power Type, Chassis Mounted
MIL-R-8781/1 - Resistors, Fixed, Wirewound, Power Type, Chassis Mounted, Style Afri02
MIL-R-8781/2 - Resistor, Fixed, Wirewound, Power Type, Chassis Mounted, Style Af104
MIL-R-8903 - Resistor, Variable, Linear Precision, Tappable (Asg)
MIL-R-93 - Resistors, Fixed, Wire-Wound, (Accurate), General Specification For
This specification covers the general requirements for accurate, wire-wound, fixed resistors having a maximum resistance tolerance of 1 percent, with the winding protected against high humidity. The resistors are rated for continuous full load operation at any ambient temperature up to 125 Degrees C, and derated up to 145 Degrees C. They are not capable for application where alternating current (ac) characteristics are of critical importance. Performance characteristics are in accordance with table I.
MIL-R-93-SUP-1 - Resistors, Fixed, Wire-Wound, (Accurate), General Specification for
This specification covers the general requirements for accurate, wire-wound, fixed resistors having a maximum resistance tolerance of 1 percent, with the winding protected against high humidity. The resistors are rated for continuous full load operation at any ambient temperature up to 125 Degrees C, and derated up to 145 Degrees C. They are not capable for application where alternating current (ac) characteristics are of critical importance. Performance characteristics are in accordance with table I.
MIL-R-93/1 - Resistor, Fixed, Wirewound (Accurate), Style Rb09
MIL-R-93/10 - Resistors, Fixed, Wire Wound (Accurate), Style Rb52
This specification covers the requirements for style RB52, accurate, wire wound, fixed resistors.
MIL-R-93/11 - Resistors, Fixed, Wire Wound (Accurate), Style Rb53
This specification covers the requirements for style RB53, accurate, wire wound, fixed resistors.
MIL-R-93/12 - Resistors, Fixed, Wire Wound (Accurate), Style Rb54
This specification covers the requirements for style RB54, accurate, wire wound, fixed resistors.
MIL-R-93/13 - Resistors, Fixed, Wire Wound (Accurate), Style Rb55
This specification covers the requirements for style RB55, accurate, wire wound, fixed resistors.
MIL-R-93/14 - Resistors, Fixed, Wire Wound (Accurate), Style Rb56
This specification covers the requirements for style RB56, accurate, wire wound, fixed resistors.
MIL-R-93/15 - Resistors, Fixed, Wire-Wound (Accurate), Style Rb08
This specification covers the detail requirements for style RB08, accurate, wire-wound, fixed resistors.
MIL-R-93/16 - Resistors, Fixed, Wire Wound (Accurate), Style Rb57 (S/S By Mil-Prf-39005/7)
This specification covers the requirements for style RB57, accurate, wire wound, fixed resistors.
MIL-R-93/17 - Resistors, Fixed, Wire-Wound (Accurate), Style Rb58
This specification covers the detail requirements for style RB58, accurate, wire-wound, fixed resistors.
MIL-R-93/18 - Resistors, Fixed, Wire-Wound (Accurate), Style Rb59
This specification covers the detail requirements for style RB59, accurate, wire-wound, fixed resistors.
MIL-R-93/19 - Resistors, Fixed, Wire Wound (Accurate), Style Rb70
This specification covers the requirements for style RB70, accurate, wire wound, fixed resistors.
MIL-R-93/2 - Resistor, Fixed, Wirewound (Accurate), Style Rb15 (Use Mil-R-93/15)
This specification covers the detail requirements for style RB15 accurate, wire-wound, fixed resistors.
MIL-R-93/20 - Resistors, Fixed, Wire Wound (Accurate), Style Rb71
This specification covers the requirements for style RB71, accurate, wire wound, fixed resistors.
MIL-R-93/27 - Resistor, Fixed, Wire Wound (Accurate), Style Rb72
This specification covers the detail requirements for style RB72, accurate, wire-wound, fixed resistors.
MIL-R-93/28 - Resistors, Fixed, Wire-Wound (Accurate), Style Rb73
This specification covers the detail requirements for style RB73, accurate, wire-wound, fixed resistors.
MIL-R-93/3 - Resistors, Fixed, Wire-Wound (Accurate), Style Rb16
This specification covers the detail requirements for style RB16, accurate, wire-wound, fixed resistors.
MIL-R-93/4 - Resistors, Fixed, Wire-Wound (Accurate), Style Rb17
This specification cover the detail requirements for style RB17, accurate, wire-wound, fixed resistors.
MIL-R-93/5 - Resistors, Fixed, Wire-Wound (Accurate), Style Rb18
This specification covers the detail requirements for style RB18, accurate, wire-wound, fixed resistors.
MIL-R-93/6 - Resistors, Fixed, Wire-Wound (Accurate), Style Rb19
This specification covers the detail requirements for style RB19, accurate, wire-wound, fixed resistors.
MIL-R-93/7 - Resistors, Fixed, Wire-Wound (Accurate), Style Rb43
This specification covers the detail requirements for style RB43, accurate, wire-wound, fixed resistors.
MIL-R-93/8 - Resistor, Fixed, Wirewound (Accurate), Style Rb44
This specification covers the detail requirements for style RB44, accurate, wire-wound, fixed resistors.
MIL-R-93/9 - Resistor, Fixed, Wire Wound (Accurate), Style Rb45
This specification covers the detail requirements for style RB45, accurate, wire-wound, fixed resistors.
MIL-R-94/1 - Resistor, Variable, Composition Style Rv1 (Use Mil-R-94/3)
MIL-R-9444 - Resistor, Fixed, Wirewound Precision High Temperature General Specification For (Use Mil-R-93)
MIL-R-9444/1 - Resistors, Fixed, Wirewound Precision High Temperature Style Afrt 10 (Use Mil-R-93/13)
MIL-R-9444/10 - Resistors, Fixed, Wirewound, Precision High Temperature Style Afrt19 (Use Mil-R-93/4)
MIL-R-9444/11 - Resistor, Fixed, Wirewound Precision High Temperature Style Afrt20)
MIL-R-9444/12 - Resistors, Fixed, Wirehound, Precision High Temerature Style Afrt21 (S/S By Mil-R-93/28)
MIL-R-9444/2 - Resistors, Fixed, Wirewound Precision High Temperature Style Aftr 11 (Use Mil-R-93/12)
MIL-R-9444/3 - Resistors, Fixed, Wirewound Precision High Temperature Style Afrt 12 (Use Mil-R-93/11)
MIL-R-9444/4 - Resistors, Fixed Wirewound, Precision High Temperature Style Afrt13 (Use Milr-93/10H
MIL-R-9444/5 - Resistors, Fixed, Wiewound, Precision High Temperature Style Afrt14 (Use Mil-R-93/16)
MIL-R-9444/6 - Resistors, Fixed, Wirewound, Precision High Temperature Style Afrt15 (Use Mil-R-93/17)
MIL-R-9444/7 - Resistors, Fixed, Wirewound, Precision High Temperature Style Afrt16 (Use Mil-R-93/18)
MIL-R-9444/8 - Resistors, Fixed, Wirewound Precision High Temperature Style Afrt 17 (Use Mil-R-93/15)
MIL-R-9444/9 - Resistors, Fixed, Wirewound, Precision High Temperature Style Afrt18 (Use Mil-R-93/3)
MIL-STD-199 - Resistors, Selection And Use Of (S/S By Mil-Hdbk-199)
This standard consists of the following: Selected standard resistor types, detailed by sections, chosen jointly by the Departments of the Army, Navy, and Air Force for use in the design and manufacture of military equipment under the jurisdiction of the Department. Guides for the choice and application of resistors for use in military equipment.
MIL-STD-221 - Color Code For Resistors (Use Mil-Std-1285)
MIL-T-23648/12 - Thermistor, (Thermally Sensitive Resistor), Insulated Negative Temperature Coefficient Style Rth28
This specification covers the detail requirements for style RTH28 thermistors.
MIL-T-23648/13 - Thermistor, (Thermally Sensitive Resistor), Insulated Negative Temperature Coefficient Style Rth30
This specification covers the detail requirments for style RTH30 thermistors.
MIL-T-23648/14 - Thermistor, (Thermally Sensitive Resistor), Insulated Negative Temperature Coefficient Style Rth32
MIL-T-23648/15 - Thermistor, (Thermally Sensitive Resistor), Insulated Negative Temperature Coefficient Style Rth34
MIL-T-23648/16 - Thermistor, (Thermally Sensitive Resistor), Insulated Negative Temperature Coefficient Style Rth36
MIL-T-23648/17 - Thermistor, (Thermally Sensitive Resistor), Insulated Negative Temperature Coefficient Style Rth38
MIL-T-23648/18 - Thermistor, (Thermally Sensitive Resistor), Insulated Negative Temperature Coefficient Style Rth40
MIL-T-23648/4 - Thermistor, (Thermally Sensitive Resistor), Insulated Negative Temperature Coefficient Style Rth12
MIL-T-23648/5 - Thermistor, (Thermally Sensitive Resistor), Insulated Negative Temperature Coefficient Style Rth14
MIL-T-23648/6 - Thermistor, (Thermally Sensitive Resistor), Insulated Negative Temperature Coefficient Style Rth16
MS16075 - Attenuator, Fixed, Cn-110B/U (Navy) (Use Mil-A-3933/2)
MS16076 - Attenuator, Fixed, Cn-121A/U (Navy) (Use Mil-A-3933/3)
MS16077 - Attenuator, Fixed, Cn/158A/U (Navy) (Use Mil-A-3933/3)
MS16078 - Attenuator, Fixed, Cn-159A/U (Navy) (Use Mil-A-3933/1)
MS16079 - Attenuator, Fixed, Cn-160A/U (Navy) (Use Mil-A-3933/3)
MS16080 - Attenuator, Fixed, Cn-168A/U (Navy) (Use Mil-A-3933/2)
MS16081 - Attenuator, Fixed, Cn-169A/U (Navy) (Use Mil-A-3933/2)
MS16082 - Attenuator, Fixed, Cn-245/U (Navy) (Use Mil-A-3933/1)
MS16083 - Attenuator, Fixed, Cn-86A/U (Navy) (Use Mil-A-3933/1)
MS16084 - Attenuator, Fixed, Cn/248/U (Navy) (Use Mil-A-3933/1)
MS16085 - Attenuator, Fixed, Cn-249/U (Navy) (Use Mil-A-3933/1-5
MS16087 - Attenuator, Fixed, Cn-326/U (Navy) (Use Mil-A-3933/5)
MS16088 - Attenuator, Fixed, Cn-327/U (Navy) (Use Mil-A-3933/5)
MS16089 - Attenuator, Fixed, Cn-328/U (Navy) (Use Mil-A-3933/5-7)
MS16090 - Attenuator, Fixed, Cn-329/U (Navy) (Use Mil-A-3933/7)
MS16094 - Attenuator, Fixed, Cn-247/U (Navy) (Use Mil-A-3933/1)
MS24118 - Resistor, Fixed, Wirewound, Precision High Temperature
MS24119 - Resistor, Fixed, Wirewound, Precision High Temperature
MS28902 - ( Images) Contact, Electrical, Leaf Tap For Use With Mil-R-8903 Resistor (Asg)
MS28927 - ( Images) Clamp-Rim, Clenching For Mil-R-8903 Resistor
MS28928 - ( Images) Coupling, Insulated, Bushing Shaft, For Mil-R-8903 Resistor (Asg)
MS28931 - Cap, Protective, Dust And Moisture Seal For Mil-R-8903 Resistor (Asg)
MS35043 - Resistors, Fixed, Composition (Insulated), Style Rc20 (Use Mil-R-11/3)
MS35044 - Resistors, Fixed, Composition (Insulated), Style Rc32 (Use Mil-R-11/6)
MS35045 - Resistors, Fixed, Composition.(Insulated), Style Rc42 (Use Mil-R-11/7)
MS35046 - Resistors, Variable, Wire-Wound (Low Operating Temperature) Style Ra20, 2 Watts (S/S By Mil-R-19/2)
MS35047 - Resistor, Variable, Wire-Wound (Low Operating Temperature) Style Ra30 4 Watts (Use Mil-Std-199 And Mil-R-19/3)
MS35048 - Resistor, Fixed, Wire-Wound (Power Type) Style Rw29 (Use Mil-Std 199 And Mil-R-26/3)
MS35049 - Resistor, Fixed, Wire-Wound Power Type (S/S By Mil-Prf-26/3)
MS35050 - Resistor, Fixed, Wirewound (Power Type) Style Rw33 (Use Mil-Std 199 And Mil-R-26/3)
MS35051 - Resistor, Fixed, Wirewound (Power Type) Style Rw35(Use Mil-Std 199 And Mil-R-26/3)
MS35052 - Resistor, Fixed, Wirewound (Power Type) Style Rw37 (Use Mil-Std 199 And Mil-R-26/3
MS35053 - Resistor, Fixed, Wirewound (Power Type) Style Rw39(
MS35054 - Resistor, External Meter (S/S By Mil-Std-199 And Mil-Prf-29)
MS35055 - Resistors, Variable, Composition Style Rv4, 2 Watts (S/S By Mil-Prf-94/5)
MS35056 - Resistor, Variable, Composition, Dual Unit (Use Mil-R-94/6 Now Mil-Prf-94/6)
MS35332 - Resistor, Fixed Wound (Power-Type) Style Rw57 (Use Mil-R-26/4)
MS35351 - Resistors, Variable Wire-Wound (Low Operating Temperature) 1 Watt (S/S By Mil-R-19/1)
MS35352 - Resistors, Variable, Composition 1/10 Watt (Use Mil-R-94/1)
MS35353 - Resistors, Fixed, Wirewound (Power Type), Style Rw31 (Use Ms-199 And Mil-R-26/3)
MS35834 - Resistor Fixed Film (High Stability) Insulated Style Rn65 (Use Mil-R-10509/1)
MS35835 - Resistor Fixed Film (High Stability) Insulated Style Rn65 (Use Mil-R-10509/2)
MS35836 - Resistor, Fixed, Film (High Stability) Insulated (Style Rn70) (Use Mil-R-10509/3)
MS35837 - Resistor Fixed Film (High Stability) Insulated Style Rn75 (Use Mil-R-10509/5)
MS35838 - Resistor, Fixed, Film (High Stability Insulated Style Rn80 )Use Mil-R-10509/6(
MS75009 - ( Images) Bracket Assembly, Resistor (Power Type)
MS90169 - Resistors, Fixed, Film (High Stability), Standard Resistance Values For 1 To 10 Decade (Use Mil-R-10509)
MS90170 - Resistors, Fixed, Film (High-Stability), Style Rn10, 1/4 Watt.
MS90171 - Resistors, Fixed, Film (High-Stability), Style Rn15, 1/2 Watt.
MS90172 - Resistors, Fixed, Film (High-Stability), Style Rn20, 1/2 Watt.
MS90173 - Resistors, Fixed, Film (High-Stability), Style Rn25, 1 Watt.
MS90174 - Resistors, Fixed, Film (High-Stability), Style Rn30, 2 Watt.
MS90178 - Standard 24-Value Series Decade For Electronic Components Of 5-, 10-, And 20-Percent Tolerances
MS90194 - Resistors, Fixed, Composition (Insulated) Style Rc30 (Use Ms 35044)
MS90704 - Attenuator, Fixed (Coaxial-Line) Cn-84U (Use Mil-A-3933/5)
MS90705 - Attenvator, Fixed (Coaxial-Line) Cn-176/U (Use Mil-A-3933/5)
MS91374 - Resistors, Fixed, Composition (Insulated), Standard Resistance Value With Corresponding Color-Code Markings (S/S By Mil-R-11)
MS91407 - Resistors, Fixed, Wirewound (Accurate), Style Rb15
MS91408 - Resistors, Fixed, Wirewound (Accurate), Style Rb16
MS91409 - Resistors, Fixed, Wirewound (Accurate), Style Rb17
MS91410 - Resistors, Fixed, Wirewound (Accurate), Style Rb18
MS91411 - Resistors, Fixed, Wirewound (Accurate), Style Rb19
MS91412 - Resistors, Fixed, Wirewound (Accurate), Style Rb43
MS91413 - Resistors, Fixed, Wirewound (Accurate), Style Rb44
MS91414 - Resistors, Fixed, Wirewound (Accurate), Style Rb45
MS91428 - Resisters, Variable (Wirewound, Power-Type) Style Rp11, 12.5 Watts (Use Mil-R-22/4)
MS91429 - Resistors, Variable (Wirewound, Power-Type) Style Rp15, 50 Watts
MS91430 - Resisters, Variable (Wirewound, Power-Type) Style Rp-16, 25 Watts (Use Mil-R-22/6)
MS91431 - Resistors, Variable (Wirewound, Power-Type) Style Rp20, 75 Watts
MS91432 - Resistors, Variable (Wirewound, Power-Type) Style Rp25, 100 Watts
MS91433 - Resistors, Variable (Wirewound, Power-Type) Style Rp30, 150 Watts
MS91434 - Resistors, Variable (Wirewound, Power-Type), Style Rp235, 225 Watts (Use Mil-R-22/10)
MS91435 - Resistors, Variable (Wirewound, Power-Type), Style Rp40, 300 Watts (Use Mil-R-22/11)
MS91436 - Resistors, Variable (Wirebound, Power-Type), Style Rp45, 500 Watts (Use Mil-R-22/12)
MS91437 - Resistors, Variable (Wirewound, Power-Type), Style Rp50, 750 Watts (Use Mil-R-22/13)
MS91438 - Resistors, Variable (Wirewound, Power-Type), Style Rp55, 1,000 Watts (Use Mil-R-22/14)
MS91829 - Resistors, Fixed, Film (Power Type), Standard Resistance Values For 10 To 100 Decade
QPL-10509-159 - Resistors, Fixed, Film (High Stability), General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-10683-16 - Resistor, Fixed (Composition Film, Very High Frequency
QPL-11-80 - Resistor, Fixed, Composition (Insulated) General Specification For
QPL-11804 - Resistors, Fixed, Film (Power Type), General Specification For
QPL-122-17 - Resistor, Fixed, Precision, Established Reliability, General Specification For (Recommended That Dscc Drawings 89088, 97009, 97010, And 97011 Be Used For Possible Replacement)
QPL-12934-56 - Resistor, Variable, Wire Wound, Precision, General Specification For
QPL-14293-3 - Resistors, Fixed, High Megohm (Hermetically Sealed)
QPL-15109-39 - Resistors And Rheostats, Naval Shipboard (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-17160-4 - Control Assembly, Motor Driven Rheostat, Degaussing, And Rheostat, Motor Driven
QPL-184-10 - Resistors, Fixed Wire-Wound (Low Power)
QPL-18546-70 - Resistors, Fixed, Wire-Wound (Power Type, Chassis Mounted), General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-19074-12 - Resistor, Fixed, Film, Accurate
QPL-19365-26 - Resistors, Adjustable, Wirewound (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-19-60 - Resistor, Variable, Wire-Wound (Low Operating Temperature), General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-22097-103 - Resistors, Variable, Nonwire Wound (Adjustment Type), General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-22684-76 - Resistors, Fixed, Film (Insulated), General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-22-70 - Resistors, Variable (Wire Wound, Power Type), General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-23285-15 - Resistors, Variable, Nonwire-Wound, General Specification For
QPL-23379-4 - Resistor, Fixed, Wirewound, Precision, Power Type, Wire Lead Terminal, General Specification For
QPL-23648-29 - Resistors, Thermal (Thermistor), Insulated, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-26-155 - Resistors, Fixed, Wire Wound (Power Type), General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-27208-45 - Resistor, Variable, Wire Wound, Nonprecision, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-29-53 - Resistors, Fixed, Meter Multiplier, External (High Voltage, Ferrule Terminal Type) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-38101-4 - Resistors, Fixd, Established Reliability General Specification For
QPL-39002-13 - Resistors, Variable, Wirewound, Semi-Precision, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-39005-71 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability, Established Reliability, General Specification For
QPL-39007-101 - Resistors, Fixed, Wire Wound (Power Type), Nonestablished Reliability, Established Reliability, And Space Level, General Specification For
QPL-39008-39 - Resistor, Fixed, Composition (Insulated), Established Reliability, General Specification For
QPL-39009-39 - Resistors, Fixed, Wire-Wound (Power Type, Chassis Mounted), Nonestablished Reliability, And Established Reliability, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-39015-73 - Resistors, Variable, Wire Wound (Lead Screw Actuated), Nonestablished Reliability, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-39017-84 - Resistors, Fixed, Film (Insulated) Nonestablished Reliability And Established Reliability, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-39023-22 - Resistors, Variable, Nonwire-Wound, Precision, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-39035-84 - Resistors, Variable, Nonwire Wound (Adjustment Type), Nonestablished Reliability, And Established Reliability, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-49462-6 - Resistors, Fixed, Film, High Voltage, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-49465-16 - Resistors, Fixed, Metal Element (Power Type), Very Low Resistance Values, General Specification (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-55182-158 - Resistors, Fixed, Film, Nonestablished Reliability, Established Reliability, And Space Level, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-55342-125 - Resistors, Chip, Fixed, Film, Nonestablished Reliability, Established Reliability, Space Level, General Specification For
QPL-6749-13 - Resistor, Variable, Wire Wound, Nonprecision, Aircraft Power (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-7790-9 - Resistor, Thermocouple Lead Spool (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-83530-7 - Resistors, Voltage Sensitive (Varistor, Metal-Oxide), General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-8781-1 - Resistor, Fixed, Wirewound, Power Type, Chassis Mounted
QPL-8903-8 - Resistor, Variable, Liner Precision, Tappable
QPL-914-6 - Resistor Networks, Fixed, Film, Surface Mount, Nonestablished Reliability, And Established Reliability, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-93-109 - Resistors, Fixed, Wire-Wound (Accurate), General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-94-101 - Resistors, Variable, Composition, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-9444-7 - Resistor, Fixed, Wirewound, Precision, High Temperature
QQ-W-486 - Wire And Ribbon; Resistance (S/S By Qq-R-175)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business