INCH-POUND
MIL-DTL-15109D
14 June 2001
SUPERSEDING
MIL-R-15109C(SH)
17 February 1989
DETAIL SPECIFICATION
RESISTORS AND RHEOSTATS, NAVAL SHIPBOARD
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers Class III shockproof resistors and rheostats for Naval shipboard service.
1.2 Classification. Resistors and rheostats of the following forms, as specified (see 6.2):
Resistors:
Form EW
-
Exposed wire or ribbon
Form IW
-
Embedded wire or ribbon
Form G
-
Grids or strips
Form R
-
Ribbon
Rheostats:
Form EW -
Exposed wire or ribbon
Form P
-
Plate
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and
supplement thereto, cited in the solicitation (see 6.2).
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post
Office Box 3990, Columbus, OH 43216-5000 by using the Standardization Document Improvement Proposal
(DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 5905
DISTRBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business