INCH-POUND
MIL-PRF-23648/3E
11 October 2002
SUPERSEDING
MIL-PRF-23648/3D
4 April 1995
PERFORMANCE SPECIFICATION
RESISTOR, THERMAL (THERMISTOR), INSULATED
NEGATIVE TEMPERATURE COEFFICIENT
STYLE RTH10
This specification is approved for use by all Departments
And Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for style RTH10 thermistor. This style is
available in resistance ratios A, B, and C. The only terminal lead available is S type. Resistance
tolerance versus temperature characteristics F, G, J, and K are applicable through the maximum
temperature of 125°C.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements documents cited in
sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATION
DEPARTMENT OF DEFENSE
MIL-PRF-23648
- Resistors, Thermal (Thermistor), Insulated, General Specification for.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of
use in improving this document should be addressed to: Defense Supply Center, Columbus, ATTN:
DSCC-VAT, Post Office Box 3990, Columbus Ohio 43216-5000 by using the Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 5905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business