INCH-POUND
MIL-PRF-39015/3M
5 October 2006
SUPERSEDING
MIL-PRF-39015/3L
19 May 1997
PERFORMANCE SPECIFICATION SHEET
RESISTORS, VARIABLE, WIRE-WOUND
(LEAD-SCREW ACTUATED),
NONESTABLISHED RELIABILITY AND ESTABLISHED RELIABILITY
STYLE RTR24
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the associated requirements for style RTR24, lead-screw
actuated, wire-wound, variable resistors. The resistors are available in a ±5 percent resistance tolerance
and terminal types L, P, W, and X.
1.2 Part or Identifying Number (PIN). Resistors covered by this specification are identified by a PIN
which consists of the document number and slash sheet, resistance value designator, terminal type, and
product level designator. The PIN is derived in accordance with MIL-PRF-39015 and in the following
format.
M39015/3
-
001
P
M
│
│
│
│
│
│
│
│
Associated specification
Resistance
Terminals
Product level
number
value
designator
designator
NOTE: The slash "/" and the dash "-" are needed in the procurement of this part.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document user are cautioned that they must meet all specified requirements documents cited in
sections 3 and 4 of this specification, whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to: US Army
Communications-Electronics Command and Fort Monmouth, ATTN: AMSEL-LC-LEO-E-EP, Fort
Monmouth, NJ 07703-5023 or emailed to Jeffery.Carver@mail1.monmouth.army.mil. Since contact
information can change, you may want to verify the currency of this address information using the
ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business