INCH-POUND
MIL-PRF-39015/2J
5 October 2006
SUPERSEDING
MIL-PRF-39015/2H
19 May 1997
PERFORMANCE SPECIFICATION SHEET
RESISTORS, VARIABLE, WIRE-WOUND
(LEAD-SCREW ACTUATED),
NONESTABLISHED RELIABILITY AND ESTABLISHED RELIABILITY
STYLE RTR22
TERMINATION "L" IS INACTIVE FOR NEW DESIGN (see 6.5)
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
*
1.1 Scope. This specification covers the associated requirements for style RTR22, lead-screw
actuated, wire-wound, variable resistors. The resistors are available in a ±5 percent resistance tolerance
and terminal types L (inactive for new design), P, W, and X.
*
1.2 Part or Identifying Number (PIN). Resistors covered by this specification are identified by a PIN
which consists of the document number and slash sheet, resistance value designator, terminal type, and
product level. The PIN is derived in accordance with MIL-PRF-39015 and in the following format.
M39015/2
-
001
P
M
│
│
│
│
│
│
│
│
Associated
Resistance
Terminals
Product level
specification
value
(see 6.5)
designator
number
designator
NOTE: The slash "/" and the dash "-" are needed in the procurement of this part.
Comments, suggestions, or questions on this document should be addressed to: US Army
Communications-Electronics Command and Fort Monmouth, ATTN: AMSEL-LC-LEO-E-EP, Fort
Monmouth, NJ 07703-5023 or emailed to Jeffery.Carver@mail1.monmouth.army.mil. Since
contact information can change, you may want to verify the currency of this address information
using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business