INCH-POUND
MIL-R-18546/1G
15 May 2001
SUPERSEDING MIL-R-18546/1F
22 April 1970
MILITARY SPECIFICATION
RESISTORS, FIXED, WIRE-WOUND (POWER TYPE, CHASSIS MOUNTED), STYLES RE60, RE65, RE70, AND RE75
INACTIVE FOR NEW DESIGN AFTER 22 APRIL 1970, USE MIL-PRF-39009/1 FOR CHARACTERISTIC G, AND MIL-PRF-39009/2 FOR CHARACTERISTIC N.
This specification is approved for use by all Department and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for styles RE60, RE65, RE70, and RE75 resistors.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in section 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document user are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2).
Beneficial comment (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be address to: DSCC-VAT, Post Office Box 3990, Columbus, Ohio 43216-5000, by using the Standardization Improvement Proposal (DD Form
1426) appearing at the end of this document or by letter.
AMSC N/A FSC 5905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business