INCH-POUND
MIL-PRF-39015/1H
5 October 2006
SUPERSEDING
MIL-PRF-39015/1G
19 May 1997
PERFORMANCE SPECIFICATION SHEET
RESISTORS, VARIABLE, WIRE-WOUND
(LEAD-SCREW ACTUATED),
NONESTABLISHED RELIABILITY AND ESTABLISHED RELIABILITY
STYLE RTR12
Inactive for new design after 8 July 2005.
For new design use MIL-PRF-27208/8.
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the associated requirements for style RTR12, lead-screw
actuated, wire-wound, variable resistors. The resistors are available in a ±5 percent resistance tolerance
and terminal types L, P, and Y.
1.2 Part or Identifying Number (PIN). Resistors covered by this specification are identified by a PIN
which will consist of the document number and slash sheet, resistance value designator, terminal type,
and product level designation. The PIN is derived in accordance with MIL-PRF-39015 and in the
following format.
M39015/1
-
001
P
M
│
│
│
│
│
│
│
│
Associated
Resistance
Terminals
Product level
specification
value
designator
number
designator
NOTE: The slash "/" and the dash "-" are needed in the procurement of this part.
Comments, suggestions, or questions on this document should be addressed to: US Army
Communications-Electronics Command and Fort Monmouth, ATTN: AMSEL-LC-LEO-E-EP, Fort
Monmouth, NJ 07703-5023 or emailed to Jeffery.Carver@mail1.monmouth.army.mil. Since
contact information can change, you may want to verify the currency of this address information
using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business