INCH-POUND
MIL-PRF-39005/10B
9 October 1997
SUPERSEDING
MIL-R-39005/10A(USAF)
6 November 1989
PERFORMANCE SPECIFICATION
RESISTORS, FIXED, WIRE-WOUND (ACCURATE),
NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY
STYLE RBR76
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the performance requirements for style RBR74, nonestablished reliability,
established reliability, accurate, wire-wound, fixed resistors. 1/
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and
supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATION
MILITARY
MIL-PRF-39005 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability, Established
Reliability, General Specification for.
(Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from the
Defense Automated Printing Service, Building 4D (NPM DODSSP), 700 Robbins Ave., Philadelphia, PA 19111-5094.
_________
1/ Not for new design, for replacement purposes only.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: DSCC-VAM, 3990 E. Broad St., Columbus, OH 43216-5000,
by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of the
basic document or by letter.
AMSC N/A
FSC 5905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business