INCH-POUND
MIL-R-10509J
20 September 2007
SUPERSEDING MIL-R-10509H
10 August 2001
MILITARY SPECIFICATION
RESISTORS, FIXED, FILM (HIGH STABILITY) GENERAL SPECIFICATION FOR
INACTIVE FOR NEW DESIGN AFTER 21 APRIL 1994.
FOR NEW DESIGN USE MIL-PRF-55182.
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for high-stability, film, fixed resistors that are relatively stable with respect to time under environmental condition.
1.2 Classification.
* 1.2.1 Part or Identifying Number (PIN). PINs to be used for resistors acquired to this specification are created as follows:
RN60 ⏐ |
D ⏐ |
1003 ⏐ |
F ⏐ |
⏐ |
⏐ |
⏐ |
⏐ |
Style (1.2.1.1) |
Characteristic (1.2.1.2) |
Resistance (1.2.1.3) |
Resistance tolerance (1.2.1.4) |
1.2.1.1 Style. The style is identified by the two letter symbol "RN" followed by a two digit number; the letters identify high stability, film, fixed resistors, and the number identifies the size of the resistors (see
3.1).
1.2.1.2 Characteristic. The characteristic is identified by a single letter in accordance with table I.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, Ohio 43218-3990, or emailed to resistor@dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A FSC 5905
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business