MIL-R-10509 Resistors, Fixed, Film High Stability General Specification ForThis specification covers the general requirements for high-stability, film, fixed resistors that are relatively stable with respect to time under environmental condition

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29

MIL-R-10509J

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-202           -  Electronics and Electrical Components Parts.

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil or from the Standard Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia PA 19111-5094.)

*                2.3  Non-Government publications.  The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are those listed in the solicitation or contract.

INTERNATIONAL ORGANIZATION for STANDARDS (ISO)

ISO 10012-1          -  Equipment, Quality Assurance Requirements for Measuring - Part 1, Meteorological Confirmation System for Measuring Equipment.

*     (Copies of this document are available from https://www.iso.org/ or from the American National Standards

Institute, 11 West 42nd  Street, New York, NY 10036.)

NATIONAL CONFERENCE OF STANDARDS LABORATORIES (NCSL)

NCSL Z540.1       -  Calibration Laboratory and Measuring and Test Equipment, General

Requirements for.

(Copies of this document are available from https://www.ncsli.org/ or from the National Conference of

Standards Laboratories (NCSL) International, 1800 30th  Street, Suite 305, Boulder, CO 80301-1026.)

*                2.4  Order of precedence.  In the event of a conflict between the text of this document, and the references cited herein (except for related specification sheets); the text of this document takes precedence.  Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

3.  REQUIREMENTS

3.1  Specification sheets.  The individual item requirements shall be as specified herein and in accordance with the applicable specification sheet.  In the event of any conflict between the requirements of this specification and the specification sheet, the latter shall govern.

3.2  Qualification.  Resistors furnished under this specification shall be a product which has been tested, and passed the qualification tests specified in 4.4, and has been listed on or approved for listing on the applicable qualified products list (see 6.3).

5