MIL-PRF-39017 Resistors, Fixed, Film \(Insulated\), Nonestablished Reliability, And Established Reliability, General Specification ForThis specification covers the general requirements for nonestablished reliability \(non-ER\) and established reliability \(ER\), insulated, film, fixed resistors. These resistors are capable of full load operation at an ambient temperature of 70 Degrees C and have a resistance temperature characteristic of 100 parts per million \(PPM\) and 350 PPM per degree Celsius \(PPM/Degrees C\). The ER resistors have life failure rate \(FR\) levels ranging from 1.0 percent to 0.001 percent per 1,000 hours \(see 1.2.1.4\). These FR levels are established at a 60 percent confidence level on the basis of life tests. Designers are CAUTIONED on using these resistors in high power pulse applications \(see 6.13.2\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12

MIL-PRF-39017G

2.3 Non-government publications. The following documents form a part of this document to the extent

specified herein. Unless otherwise specified, the issues of the documents which are those listed in the

solicitation or contract.

AMERICAN NATIONAL STANDARD (ANS)

Requirements for Soldering Fluxes.

(DoD activities may obtain copies of American National Standard J-STD-004 from the Standardization

Document Order Desk. Private sector and other Government agencies may purchases copies from the

60646).

AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)

Reagent Water.

(Application for copies should be addressed to the American Society for Testing and Materials, 1916

Race Street, Philadelphia, PA 19103-1187.)

ELECTRONIC INDUSTRIES ASSOCIATION (EIA)

Assessment of Average Outgoing Quality Levels in Parts Per Million (PPM).

Statistical Process Control Systems (SPC).

(Application for copies should be addressed to Electronic Industries Association, 2500 Wilson

Boulevard, Arlington, VA 22201-3834.)

2.4 Order of precedence. In the event of a conflict between the text of this document, and the

references cited herein (except for associated specifications, specification sheets, or MS sheets); the text

of this document takes precedence. Nothing in this document, however, supersedes applicable laws and

regulations unless a specific exemption has been obtained.

3. REQUIREMENTS

3.1 Specification sheets. The individual item requirements shall be as specified herein and in

accordance with the applicable specification sheet. In the event of any conflict between the requirements

of this specification and the specification sheet, the latter shall govern (see 6.2).

3.2 Qualification. Resistors furnished under this specification shall be products that are authorized by

the qualifying activity for listing on the applicable Qualified Products List (QPL) before contract award

(see 4.4 and 6.3). In addition, the manufacturer shall obtain certification from the qualifying activity that

the QPL system requirements of 3.3 and 4.2 have been met and are being maintained. Authorized

distributors that are approved to MIL-STD-790 distributor requirements by the QPL manufacturer are

listed in the QPL.