MIL-R-26/6D
RW80 |
RW81 |
|
A |
.406 ±.031 |
.250 ±.031 |
B |
.094 ±.031 |
.085 ±.020 |
D |
.020 ±.0015 |
.020 ±.0015 |
Inch |
mm |
Inch |
mm |
Inch |
mm |
.0015 |
.04 |
.085 |
2.16 |
.375 |
9.53 |
.020 |
.51 |
.094 |
2.39 |
.406 |
10.31 |
.031 |
.79 |
.250 |
6.35 |
1.750 |
44.45 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. These styles shall be untapped.
4. The end of the resistor body is the point where the diameter reduces to 0.06 inch.
FIGURE 1. Styles RW80 and RW81.
3.5 Thermal shock. The resistors shall not change in resistance in excess of ±(0.2 percent +0.05 ohm).
3.6 Short-time overload. The resistors shall not change in resistance in excess of ±(0.2 percent +0.05 ohm).
3.7 High-temperature exposure. The resistors shall not change in resistance in excess of ±(0.5 percent
+0.05 ohm).
3.8 Moisture resistance. The resistors shall not change in resistance in excess of ±(0.2 percent +0.05 ohm).
3.9 Low-temperature storage. The resistors shall not change in resistance in excess of ±(0.2 percent
+0.05 ohm).
3.10 Life. The resistors shall not change in resistance in excess of ±(0.5 percent +0.05 ohm).
3.11 Solderability. Solderability is applicable to this specification.
3.12 Shock (medium impact). The resistors shall not change in resistance in excess of ±(0.1 percent
+.05 ohm).
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business