MIL-PRF-914-5 Resistor Network, Fixed, Film, Surface Mount, 16-Pin, Leadless Chip Carrier, Nonestablished Reliability And Established Reliability, Style Rns050This specification covers the associated requirements for RNS050 resistor networks. Resistors covered by this specification are considered a monolithic design or wire bond and die construction. The established reliability \(ER\) and nonestablished reliability \(non-ER\) styles are available in all characteristics and resistance tolerances. Designers are CAUTIONED on using these resistors in pulse applications \(see 6.6\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7

MIL-PRF-914/5B

Configuration B

Inches

0.002

0.05

0.005

0.13

0.018

0.46

0.028

0.71

0.050

1.27

0.125

3.18

0.003

0.08

0.008

0.20

0.022

0.56

0.035

0.89

0.055

1.40

0.150

3.81

0.004

0.10

0.010

0.25

0.025

0.64

0.040

1.02

0.120

3.05

0.410

10.41

NOTES:

1. Dimensions are in inches.

2. Metric equivalents are given for general information only.

3. Unless otherwise specified, tolerances are �.008 (0.20 mm).

4. Pin 1 locator shall be a dot, stripe, notch, or numeral adjacent to pin number 1, in the shaded area.

5. The picturization of the styles above is given as representative of the envelope of the item. Slight deviations from

the outline shown, which are contained within the envelope and do not alter the functional aspect of the device,

are acceptable.

FIGURE 1. Leadless chip carrier - Continued.