MIL-PRF-39023/10C
1.2.7 Output smoothness characteristic. The output smoothness characteristic applicable to this specification will
be symbol F (1.0 percent degraded to 1.4 percent) (see 4.1.1).
1.2.8 Resistance. The nominal total resistance value shall be 5 Kilohms (5kΩ) and maximum end voltage will be
2.0 percent of total applied voltage.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2. .2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation (see 6.2).
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-39023 - Resistors, Variable, Nonwirewound, Precision, General Specification for.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil
or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094).
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein (except for related specification sheets), the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 General. The requirements for acquiring the product described herein shall consist of this document and
3.2 Interface and physical dimensions. The resistors shall meet the interface and physical dimension specified in
figure 1.
3.3 Total resistance. The total resistance value shall be 5,000 ohms ± 20 percent.
3.4 Mechanical travel. The mechanical travel shall be 360 degrees continuous.
3.5 Theoretical electrical travel. The theoretical electrical travel shall be 50 degrees (± 3 degrees).
3.6 Electrical overtravel. The electrical overtravel shall be 125 degrees at each end.
3.7 Maximum continuous working voltage. The maximum continuous working voltage shall be 50 volts.
O
O
3.8 Power rating. The power rating shall be 0.5 watts at 60 C derated to 0 at 125 C.
3.9 Torque. The starting torque shall be 2.0 ounce-inches and the running torque shall be 1.7 ounce-inches.
3.10 Housing. The resistor housing shall be metal.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business