MIL-PRF-23648F
TABLE III. Resistance tolerance versus temperature for each resistance tolerance.
*
Sequence
Temperature
F
G
J
K
(± percent)
(± percent)
(± percent)
(± percent)
1/ 12 (17)
1/ 15 (20)
1/ 20 (25)
1/ 10 (15)
1
-55
1/ 5 (9)
1/ 6 (10)
1/ 9 (13)
1/ 14 (18)
2
-15
3
4
7
12
3
0
1
2
5
10
4
25
3
4
7
12
5
50
5
6
9
14
6
75
7
9
12
17
7
100
10
12
15
20
8
125
15
18
25
30
2/ 200
9
20
25
35
40
2/ 275
10
1/ The percentages in parentheses are for positive coefficient thermistors.
2/ These temperatures are not applicable styles (see 3.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
The section does not include documents cited in other sections of this specification or recommended for
additional information or as samples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements documents cited in
sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATION
(See supplement 1 for a list of associated specifications.)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-202 - Test Methods Standard For Electronics and Electrical Component Parts.
MIL-STD-1285 - Marking Of Electrical and Electronic Parts.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue,
Building 4D, Philadelphia, PA 19111-5094.)
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business