MIL-PRF-22097-4 Resistor, Variable, Nonwirewound, Adjustment Type, Lead Screw Actuated, Style Rj24This specification covers the requirements for style RJ24, adjustment type, lead-screw actuated, nonwirewound, variable resistors. This style is available in characteristics C \(used characteristic F as a replacement for characteristic C\) and F.

Pages 1 - 2 - 3 - 4 - 5

MIL-PRF-22097/4F

Inches

.009

0.23

024

0.61

.075

1.91

.150

3.81

.195

4.95

.010

0.25

.025

0.64

.080

2.03

.172

4.37

.375

9.53

.015

0.38

.050

1.27

.100

2.54

.187

4.75

.419

10.64

.020

0.51

.072

1.83

.125

3.18

.190

4.83

.420

10.67

NOTES:

1. Dimensions are in inches.

2. Unless otherwise specified, tolerance is �.005 (.13 mm).

3. Metric equivalents (to the nearest .01 mm) are given for general information only and are based upon

1 inch = 25.4 mm.

4. The three leads shall be of a stranded wire, AWG size 28 to 30, having a minimum length of 6 inches

(152.4 mm); they shall be insulated with polytetrafluoroethylene, stripped .250 �.062 inches (6.35 �1.57 mm)

from the end and color coded.

5. The picturization of the styles above are given as representative of the envelope of the item. Slight deviations

from the outline shown, which are contained within the envelope, and do not alter the functional aspects of

the device are acceptable.

6. The entire slot of the actuating screw must be above the surface of the unit.

7. For types P, W, and X, normal mounting means is by use of pins only.

FIGURE 1. Style RJ24 - Continued.