MIL-R-22684-3 Resistors, Fixed, Film, Insulated, Style Rl32This specification covers the associated requirements for insulated, film, fixed resistors of 2-percent and 5-percent resistance tolerance. These resistors are capable of full-load operation at an ambient temperature of 70 degrees C and have a resistance-temperature characteristic of +200 parts per million per degree Celsius ppm/degrees C. Designers are CAUTIONED on using these resistors in high power pulse applications see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8

MIL-R-22684/3C

Table I.  PIN designation -  continued.

4.  VERIFICATION

4.1  Sampling and inspection.  Sampling and inspection procedures shall be in accordance with Group A

inspection and Group B inspection of MIL-PRF-22684 and as specified herein.

5.  PACKAGING

5.1  Packaging.  For acquisition purposes the packaging requirements shall be as specified in the contract or purchase order.  When actual packaging of materiel is to be performed by DoD personnel, these personnel need to contact the responsible packaging activity to ascertain requisite packaging requirements.  Packaging requirements are maintained by the Inventory Control Point's packaging activity within the Military Department or Defense Agency, or within the Military Department's System Command. Packaging data retrieval is available from the managing Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.

6.  NOTES

(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)

6.1  Notes  The notes specified in MIL-PRF-22684 are applicable to this specification.

6.2  Acquisition requirements.  Acquisition documents must specify the following:

a.  Title, number, date of this specification, and complete PIN (see 1.2).

b.  Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of individual documents referenced (see 2.2).

c.  Packaging requirements.

6