MIL-R-22684-3 Resistors, Fixed, Film, Insulated, Style Rl32This specification covers the associated requirements for insulated, film, fixed resistors of 2-percent and 5-percent resistance tolerance. These resistors are capable of full-load operation at an ambient temperature of 70 degrees C and have a resistance-temperature characteristic of +200 parts per million per degree Celsius ppm/degrees C. Designers are CAUTIONED on using these resistors in high power pulse applications see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8

MIL-R-22684/3C

Ltr	DIMENSIONS
	INCHES		MILLIMETERS
	MIN	MAX	MIN	MAX
A	0.520	0.593	13.21	15.06
B	1.375	1.625	34.92	41.28
C	.038	0.042	0.96	1.07
D	0.175	0.205	4.45	5.21

NOTES:

1. Dimensions are in inches.

2. Metric equivalents are given for general information only.

3. The end of the body shall be that point at which the diameter equals the nearest drill size larger than 250 percent of the nominal lead diameter. The leads shall be solderable to within .125 inch (3.18 mm) of the resistor body.

FIGURE 1. Configuration and dimensions.

3.8 Insulation resistance. Resistors shall be tested as specified in MIL-PRF-22684 except the insulation resistance shall be not less than 100 megohms.

3.9 Moisture resistance. Resistors shall be tested as specified in MIL-PRF-22684 except the change in resistance shall not exceed 1.5 percent.

3.10 Life. Resistors shall be tested as specified in MIL-PRF-22684 except the change in resistance shall not exceed 2.0 percent.