MIL-PRF-39009-1 Resistors, Fixed, Wire-Wound, \(Power Type, Chassis Mounted\), Nonestablished Reliability, And Established Reliability, Styles Rer60, Rer65, Rer70, And Rer75This specification covers the associated requirements for nonestablished reliability and established reliability styles RER60, RER65, RER70, and RER75 resistors. These resistors are inductively wound.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8

MIL-PRF-39009/1D

5. PACKAGING

5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the

contract or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor

personnel, these personnel need to contact the responsible packaging activity to ascertain packaging

requirements. Packaging requirements are maintained by the Inventory Control Point's packaging activity

within the Military Department or Defense Agency, or within the military service's system commands.

Packaging data retrieval is available from the managing Military Department's or Defense Agency's

automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.

6. NOTES

(This section contains information of a general or explanatory nature that may be helpful, but is not

mandatory.)

6.1 Intended use. In addition to the notes specified herein, the notes specified in MIL-PRF-39009 are

applicable to this specification.

6.2 Acquisition requirements. Acquisition documents must specify the following:

a. Title, number, and date of this specification and the complete PIN (see 1.2).

b. Unless otherwise specified (see 2.1), the versions of the individual documents referenced will be

those in effect on the date of release of the solicitation.

c. Packaging requirements (see 5.1).

6.3 MIL-R-18546/1 substitution data. Resistors of this specification, regardless of their failure rate (FR)

designation, are substitutes for resistors of the same resistance value and characteristic G as specified in

the inactivated specification MIL-R-18546/1 as in accordance with table VIII.

TABLE VIII. Substitution data.

MIL-R-18546/1

Substitute

characteristic G

MIL-PRF-39009/1

(Inductive)

Style

RE60

RER60

RE65

RER65

RE70

RER70

RE75

RER75

6.3.1 Interchangeability. The increase in power rating for RER70 by this revision does not require the

assignment of new Federal Stock Numbers for items previously described as RE70, 15 watt rating. Items

in this specification are mutually interchangeable with items of the same type designation procured under

MIL-R-39009/1A.