MIL-PRF-39009-1 Resistors, Fixed, Wire-Wound, \(Power Type, Chassis Mounted\), Nonestablished Reliability, And Established Reliability, Styles Rer60, Rer65, Rer70, And Rer75This specification covers the associated requirements for nonestablished reliability and established reliability styles RER60, RER65, RER70, and RER75 resistors. These resistors are inductively wound.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8

MIL-PRF-39009/1D

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in section 3 and 4 of this specification.

This section does not include documents cited in other sections of this specification or recommended for

additional information or as examples. While every effort has been made to ensure the completeness of

this list, document user are cautioned that they must meet all specified requirements documents cited in

sections 3 and 4 of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and

handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the

issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

Resistors, Fixed, Wire-wound (Power Type, Chassis Mounted),

Nonestablished Reliability, and Established Reliability, GSF.

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the

Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia PA 19111-5094.)

2.3 Order of precedence. Unless otherwise noted herein or in the event of a conflict between the text of

this document and the references cited herein (except for related specification sheets), the text of this

document takes precedence. Nothing in this document, however, supersedes applicable laws and

regulations unless a specific exemption has been obtained.

3. REQUIREMENTS

3.1 General. The requirements for acquiring the product described herein shall consist of this document

3.2 Interface and physical dimension. Resistors shall meet the interface and physical dimensions

specified on figure 1 and as specified herein.

3.2.1 Weight. The maximum weight shall be as specified in table I.

TABLE I. Weight.

Resistor

Weight

style

(grams, maximum)

RER60

RER65

RER70

RER75