MIL-PRF-39005/8C
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
*
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-39005 - Resistors, Fixed, Wire-Wound (Accurate), Nonestablished Reliability and
Established Reliability, General Specification for.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
*
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
2.3 Order of precedence. Unless otherwise noted herein or in the event of a conflict between the text
*
of this document and the references cited herein (except for related specification sheets), the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 General. The requirements for acquiring the product described herein shall consist of this
document and MIL-PRF-39005.
3.2 Interface and physical dimensions. Resistors shall meet the interface and physical dimensions
specified on figure 1.
3.3 Applicable resistance values and tolerances. Applicable resistance values based on use of 0.0009
absolute diameter wire shall be 100, 681, 806, 909, and 6,520 ohms. Initial resistance tolerance shall be
±0.1 percent.
3.4 Power rating. Power rating shall be 0.125 watt.
3.5 Maximum voltage. Maximum voltage shall be 150 volts direct current or peak.
3.6 Maximum weight. The maximum weight shall be 2 grams.
4. VERIFICATION
4.1 Verification. Verification shall be in accordance with MIL-PRF-39005.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business