MIL-PRF-22097/2H
TABLE I. Nominal resistance value and maximum rated ac or dc working voltage.
Maximum rated ac or dc working
Maximum rated ac or dc working
Nominal
Nominal
voltage per characteristic C and
voltage per characteristic C and
resistance value
resistance value
characteristic F
characteristic F
(in Ohms)
(in Ohms)
(in volts)
(in volts)
10
2.7
10,000
86.7
20
3.8
20,000
122
50
6.1
25,000
136
100
8.7
50,000
194
200
12.3
100,000
274
500
19.4
200,000
300
1/
1,000
27.4
250,000
300
2,000
38.7
500,000
300
5,000
61.3
1,000,000
300
1/ For replacement purpose only, not for design.
4. VERIFICATION
4.1 Sampling and inspection. Sampling and inspection shall be in accordance with MIL-PRF-22097, and as
specified herein.
4.2 Dielectric withstanding voltage. The magnitude of test voltage shall be 900 volts at atmospheric pressure, and
350 volts at reduced barometric pressure.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order
(see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel
need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are
maintained by the Inventory Control Point's packaging activity within the Military Service or Defense Agency, or within
the military services system commands. Packaging data retrieval is available from the managing Military Department's
or Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible packaging
activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. The notes specified in MIL-PRF-22097are applicable to this specification.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a.
Title, number, and date of this date of this specification, the applicable associated specification, and the
complete PIN.
Unless otherwise specified (see 2.1), the versions of the individual documents referenced will be those in
b.
effect on the date of release of the solicitation.
c.
Packaging requirements (see 5.1).
d.
Allowable substitution.
6.3 Weight. The maximum weight is .00992 pound (4.5 grams).
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business