MIL-PRF-22097/2H
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.003
0.08
.028
0.71
.100
2.54
.700
17.78
.010
0.25
.031
0.79
.250
6.35
.025
0.64
.052
1.32
.300
7.62
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerance is ±.005 (.13 mm).
3. Metric equivalents (to the nearest .01 mm) are given for general information only and are based upon
1 inch = 25.4 mm.
4. The three leads shall be of a stranded wire, AWG size 28 to 30, having a minimum length of 6 inches (152.4
mm); they shall be insulated with polytetrafluoroethylene, stripped .250 ±.062 inches (6.35 ±1.57 mm) from
the end and color coded.
5. The picturization of the styles above are given as representative of the envelope of the item. Slight
deviations from the outline shown, which are contained within the envelope, and do not alter the functional
aspects of the device are acceptable.
FIGURE 1. Style RJ12 - Continued.
3.3 Power rating. The power rating shall be .75 watt for characteristic C and F.
3.4 Terminals. Characteristic C and characteristic F are available with L-type, P-type, and Y-type terminals.
3.5 Nominal resistance value and maximum rated ac or dc working voltage. Nominal resistance values and
maximum rated ac or dc working voltages shall be as specified in table I.
3.6 Actual effective electrical travel. Actual effective electrical travel shall be 17 turns minimum, and 27 turns
maximum.
3.7 Operating torque. Operating torque shall be a maximum of 8 ounce-inches.
3.8 Pure tin. The use of pure tin, as an underplate or final finish, is prohibited both internally and externally. Tin
content of resistor components and solder shall not exceed 97 percent, by mass. Tin shall be alloyed with a
minimum of 3 percent lead, by mass (see 6.4).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business