Degrees C depending upon the resistance value. They are not capable for application when the alternating current \(ac\) characteristics are of critical importance; however, provisions have been made to minimize the inductance.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16

MIL-PRF-18546G

DEPARTMENT OF DEFENSE SPECIFICATIONS

- Resistors, Fixed, Wire-Wound (Power Type, Chassis Mounted), Styles

RE60, RE65, RE70, and RE75.

- Resistors, Fixed, Wire-Wound (Power Type, Chassis Mounted), Styles

RE77 and RE80.

- Resistors, Fixed, Wire-Wound (Power Type, Chassis Mounted),

Nonestablished Reliability, and Established Reliability, General

Specification for.

DEPARTMENT OF DEFENSE STANDARDS

- Test Methods Standard Electronics and Electrical Component Parts.

- Marking of Electrical and Electronic Parts.

DEPARTMENT OF DEFENSE HANDBOOKS

- Screw Thread Standards for Federal Services.

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or

https://assist.daps.dla.mil or from the Standardization Order Desk, 700 Robbins Avenue, 700 Robbins

Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.3 Non-government publications. The following documents form a part of this document to the extent

specified herein. Unless otherwise specified, the issues of the documents cited on the solicitation or

contract (see 6.2).

AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)

- Laboratories, Calibration, and Measuring and Test Equipment.

INTERNATIONAL ORGANIZATION FOR STANDARDS (ISO)

- Equipment, Quality Assurance Requirements for Measuring - Part 1:

Meteorological Confirmation System for Measuring Equipment.

(Application for copies is available online at https://www.ansi.org/ or should be addressed to the

American National Standards Institute, 11 West 42nd Street, New York, NY 10036.)

(Non-Government standards and other publications are normally available from the organizations that

prepare or distribute the documents. These documents also may be available in or through libraries or

other informational services.)

2.4 Order of precedence. In the event of a conflict between the text of this document, and the

references cited herein (except for related specification sheets) the text of this document takes

precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.