MS75009J
Pan head machine screw dash no. 1/ |
Threaded rod dash no. 1/ |
Dimensions |
||
L 2/ (approx) |
Screw thread |
|||
Screw |
Rod |
|||
-18 -19 -20 -21 -22 -23 |
-10 -11 -12 -13 -14 -15 |
3.750 4.760 6.750 8.750 11.250 12.750 |
4.250 5.250 7.250 9.250 11.750 13.250 |
.164-32 UNC-2A (number 8) .190-32 UNF-2A (number 10) |
1/ The dash number added to the military-specification number constitutes the MS PIN; for example: MS75009-1.
2/ When assembled, not less than 1.5 threads nor more than 0.38 inch of thread shall extend beyond each nut.
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±0.005 (0.13 mm) on decimals.
4. Pan head machine screws not covered by NASM35206 and threaded rods shall be carbon-steel wire or carbon steel conforming to ASTM A108, A575, A576, A663, or A675, respectively.
5. Threaded parts shall be in accordance with FED-STD-H28.
6. Referenced documents shall be of the issue in effect on date of invitations for bid.
7. For design feature purposes, this specification sheet takes precedence over acquisition documents referenced herein.
FIGURE 5. Rods.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business