MIL-R-93-14 Resistors, Fixed, Wire Wound Accurate, Style Rb56This specification covers the requirements for style RB56, accurate, wire wound, fixed resistors.

Pages 1 - 2 - 3 - 4 - 5

MIL-R-93/14E

2.2  Government documents.

2.2.1  Specifications, standards, and handbooks.  The following specifications, standards, and handbooks form a part of this document to the extent specified herein.  Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2).

SPECIFICATIONS DEPARTMENT OF DEFENSE

MIL-R-93        -  Resistors, Fixed, Wire Wound, (Accurate), General Specification for.

(Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from the Document Automation and Production Service, Building 4D, (DPM-DODSSP), 700

Robbins Avenue, Philadelphia, PA 19111-5094.)

2.3  Order of precedence.  In the event of a conflict between the text of this document and the references cited herein (except for related associated specifications, specification sheets, or MS sheets), the text of this document takes precedence.  Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

3.  REQUIREMENTS

3.1  General.  The requirements for acquiring the product described herein shall consist of this document and MIL-R-93.

3.2  Interface and physical dimensions.  Resistors shall meet the interface and physical dimensions specified on figure 1.

3.3  Resistanc e values and resistance tolerances.  The maximum and minimum resistance values, and resistance tolerance shall be as specified in table I.

TABLE I.  Resistance values and resistance tolerance.

3.4  Power rating.  Power rating shall be 0.125 watt.

3.5  Maximum voltage.  Maximum voltage shall be 150 volts direct current or peak.

2