MIL-R-10509/2J
6.2 Acquisition requirements. Acquisition documents must specify the following. a. Title, number, and date of this specification.
b. Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of individual documents referenced (see 2.2.1).
c. Packaging requirements (see 5.1).
6.3 Substitution data. The resistors specified herein are not for use in design after 9 May 1972. They are authorized for use in design contracts effective prior to or on 9 May 1972. Existing equipment shall be supported by substitute resistors in MIL-PRF-55182/5 of the same resistance value, resistance tolerance, and characteristic performance of this specification regardless of failure rate designation. Resistors specified in MIL-PRF-55182/5 are preferred for design and regardless of failure rate designation can be used as substitutes for inactivated resistors of the same resistance value, tolerance, and characteristic performance of this specification. Characteristics C, E, F, and G were previously inactivated for design by revision F of this specification, dated 22 November 1968. Characteristic substitution shall be made as indicated in table II.
TABLE II. Characteristic substitution.
MIL-R-10509 Characteristic |
Substitute MIL-PRF-55182 characteristic |
C D E G |
H K J C |
6.4 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extensiveness of the changes.
Custodians: Preparing activity: Army - CR DLA - CC
Navy - EC
Air Force - 11 (Project 5905-1627-02)
Review activities:
Army - AR, AT, AV, CR4, MI Navy - AS, CG, MC, OS
Air Force - 19
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business