MIL-PRF-55342-5 Resistors, Chip, Fixed, Film, Nonestablished Reliability, Established Reliability, Space Level, Style Rm2208This specification covers the requirements for style RM2208, fixed, film, chip, nonestablished reliability, established reliability, and space level resistors. This style is available in characteristic H, characteristic E, characteristic K, characteristic L, and characteristic M, resistance tolerances .1 percent, .25 percent, .5 percent, 1 percent, 2 percent, 5 percent, and 10 percent, and all termination materials. Designers are CAUTIONED on using these resistors in high power pulses applications \(see 6.5\).

Pages 1 - 2 - 3 - 4 - 5

MIL-PRF-55342/5J

TABLE I. Minimum and maximum resistance values and tolerances.

Resistance

Minimum

Maximum

tolerance

resistance

percent (�)

1.0 megohm

100 ohms

0.1

15.0 megohms

5.62 ohms

1.0

15.0 megohms

5.6 ohms

2.0

15.0 megohms

5.6 ohms

5.0

15.0 megohms

5.6 ohms

10.0

4. VERIFICATION

4.1 Verification. Verification shall be in accordance with MIL-PRF-55342.

5. PACKAGING

5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the

contract or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house

contractor personnel, these personnel need to contact the responsible packaging activity to ascertain

packaging requirements. Packaging requirements are maintained by the Inventory Control Point's

packaging activity within the Military Service or Defense Agency, or within the military services system

commands. Packaging data retrieval is available from the managing Military Department's or Defense

Agency's automated packaging files, CD-ROM products, or by contacting the responsible packaging

activity.

6. NOTES

(This section contains information of a general or explanatory nature that may be helpful, but is not

mandatory.)

6.1 Intended use. Chip resistors are intended to be used in thin or thick film hybrid circuits where

micro-circuitry is indicated and in surface mount applications.

6.2 Acquisition requirements. Acquisition documents should specify the following:

a. Title, number, date of this specification, the applicable associated specification, and the complete

PIN (see 1.2).

b. Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of individual

documents referenced (see 2.2).

c. Packaging requirements (see 5.1). (i.e. Electrostatic discharge (ESD) sensitive packaging).

d. Allowable substitution (see MIL-PRF-55342).

e. If marking is required (see MIL-PRF-55342).