, nonestablished reliability, established reliability, and space level, film, fixed resistors. Designers are CAUTIONED on using these resistors in high power pulse applications \(see 6.3\).

Pages 1 - 2 - 3 - 4 - 5

MIL-PRF-55182/2K

3. REQUIREMENTS

3.1 General. The requirements for acquiring the product described herein shall consist of this document and

MIL-PRF-55182G.

3.2 Interface and physical dimensions. Resistors shall meet the interface and physical dimensions specified on

figure 1.

3.2.1 Characteristic. Style RN*57 is available in characteristic C and characteristic E. 1/

3.2.2 Terminal. Terminal types RNR, and RNN are available for characteristic C and characteristic E.

3.3 Power rating. The power rating shall be 0.125 watt.

3.4 Voltage rating. The continuous working voltage shall not exceed 250 volts.

3.5 Resistance. The minimum resistance shall be 10.0 ohms and the maximum resistance shall be 0.200

megohm.

3.6 Resistance tolerance. This style is available only in tolerance F (1.0 percent).

3.7 Voltage coefficient (applicable to resistors of 1,000 ohms and above). The voltage coefficient shall not exceed

�0.005 percent per volt.

3.8 Marking. Due to size limitations this style resistor shall be marked with the following minimum information:

226C - Date code, characteristic.

10R0 - Coded resistance value.

FMDJ - Tolerance, product level, lead material, JAN marking.

The complete marking is required on the unit package. Where manufacturers are able to provide more information,

the following is preferred in the sequence presented: style, manufacturer's trademark, production lot code, and

source code.

4. VERIFICATION

4.1 Verification. Verification shall be in accordance with MIL-PRF-55182.

5. PACKAGING

5.1 Packaging requirements. For acquisition purposes, the packaging requirements shall be as specified in the

contract or order. When actual packaging of material is to be performed by DoD personnel, these personnel need to

contact the responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements

are maintained by the Inventory Control Point's packaging activity within the Military Department or Defense Agency,

or within the Military Department's System Command. Packaging data retrieval is available from the managing

Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the

responsible packaging activity.

_________

1/ Third letter is variable, dependent upon lead material or capability.