MIL-PRF-55182/13B
5. PACKAGING
5.1 Packaging requirements. For acquisition purposes, the packaging requirements shall be as specified in the
contract or order. When actual packaging of material is to be performed by DoD personnel, these personnel need to
contact the responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements
are maintained by the Inventory Control Point's packaging activity within the Military Department or Defense Agency,
or within the Military Department's System Command. Packaging data retrieval is available from the managing
Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the
responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Notes. The notes specified in MIL-PRF-55182 are applicable to this specification.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a.
Title, number, and date of the specification.
b.
Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of individual documents
referenced (see 2.1).
*
c.
Packaging requirements (see 5.1). (i.e. Electrostatic discharge (ESD) sensitive packaging).
6.3 Power rating at 70°C. The power rating at 70°C for 2,000 hours life test has been established at 2.0 watts;
however, it should be noted that the failure rate level is established at the single condition of 125°C, 1.0 watt and
10,000 hours life test duration. The user should consider the FR level as assigned only to the 125°C.
6.4 Electrostatic charge. Under several combinations of conditions, these resistors can be electrically damaged,
*
by electrostatic charges, and drift from specified value. Users should consider this phenomena when ordering or
shipping resistors. Direct shipment to the Government is controlled by MIL-DTL-39032 which specifies a preventive
packaging procedure.
*
6.5 Changes from previous issue. The margins of this specification are marked with asterisks to indicate where
changes from the previous issue were made. This was done as a convenience only and the Government assumes no
liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the
requirements of this document based on the entire content irrespective of the marginal notations and relationship to
the last previous issue.
Custodians:
Preparing activity:
Army - CR
Army - CR
Navy - EC
*
Air Force - 11
Agent:
NASA - NA
DLA - CC
Review activities:
(Project 5905-1677-08)
Army - AR
Navy - AS, CG, MC, OS
Air Force - 19, 99
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business