MIL-PRF-39017/1P
SPECIFICATION
DEPARTMENT OF DEFENSE
MIL-PRF-39017 -
Resistors, Fixed, Film (Insulated), NonEstablished Reliability and
Established Reliability, General Specification for.
(Unless otherwise indicated, copies of Department of Defense specifications, standards, and
handbooks are available from the Defense Printing Service Detachment Office, Building 4D (Customer
Service), 700 Robbins Avenue, Philadelphia PA 19111-5094.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document, however,
supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 General. The requirements for acquiring the product described herein shall consist of this
document and MIL-PRF-39017.
3.2 Interface and physical dimension requirements. Resistors shall meet the interface and physical
dimensions specified on figure 1.
3.3 Power rating. The power rating shall be 0.25 watt.
3.4 Voltage rating. The continuous working voltage shall not exceed 250 volts.
3.5 Resistance and resistance tolerance. Minimum resistance and maximum resistance values and
resistance tolerance for temperature characteristics of ±100 parts per million (PPM) and ±350 PPM shall
be as follows:
100 PPM
350 PPM
Resistance tolerance (percent)
1, 2
2, 5, 10
1Ω
11 MΩ
Minimum resistance
10 MΩ
22 MΩ
Maximum resistance
3.6 Maximum weight. The maximum weight shall not exceed 0.5 gram.
3.7 Marking. Due to size limitations this style resistor shall be marked with the following minimum
information in the order shown:
603AJ - Year and week manufactured, lot code (letters "0" and "I" excluded), and JAN
marking.
RLR7C - Partial style ("0" deleted for partial marking), terminal.
1002F - Resistance value, tolerance.
M*
- Product level designator and manufacturer's code (see qualified products list for
manufacturer's code symbols).
Full marking is required on the unit package.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business