MIL-PRF-39009/2C
5. PACKAGING
*
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the
contract or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor
personnel, these personnel need to contact the responsible packaging activity to ascertain packaging
requirements. Packaging requirements are maintained by the Inventory Control Point's packaging activity
within the Military Department or Defense Agency, or within the military service's system commands.
Packaging data retrieval is available from the managing Military Department's or Defense Agency's
automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not
mandatory.)
6.1 Intended use. In addition to the notes specified herein, the notes specified in MIL-PRF-39009 are
applicable to this specification.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this specification and the complete PIN (see 1.2).
b. Unless otherwise specified (see 2.1), the versions of the individual documents referenced will be
*
those in effect on the date of release of the solicitation.
c. Packaging requirements (see 5.1).
6.3 MIL-R-18546/1 substitution data. Resistors of this specification, regardless of failure rate (FR), are
substitutes for resistors of the same resistance value and characteristic N of the inactivated specification
MIL-R-18546/1 as in accordance with table VIII.
TABLE VIII. Substitution data.
MIL-R-18546/1
Substitute
MIL-PRF-39009/2
characteristic N
(Non-Inductive wound)
Style
Style
RE60
RER40
RE65
RER45
RE70
RER50
RE75
RER55
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business