MIL-PRF-27208/10C
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
0.001
0.03
0.016
0.41
0.040
1.02
0.115
2.92
0.175
4.45
0.003
0.08
0.018
0.46
0.050
1.27
0.125
3.18
0.250
6.35
0.010
0.25
0.020
0.51
0.075
1.91
0.165
4.19
0.015
0.38
0.030
0.76
0.100
2.54
0.172
4.37
NOTES:
1.
Dimensions are in inches.
2.
Metric equivalents are given for general information.
Unless otherwise specified, tolerance is ±0.005 (0.13mm).
3.
4.
The entire slot of the actuating screw must be above the surface of the unit.
FIGURE 1. Style RT26 - Continued.
3.5 Actual effective electrical travel. The actual effective electrical travel shall be 10 turns minimum and 25 turns
maximum.
3.6 Operating torque. The torque required to effect rotation shall be 3 inch-ounce maximum.
4. VERIFICATION
4.1 Sampling and inspection. Sampling and inspection shall be in accordance with MIL-PRF-27208.
4.2 Dielectric withstanding voltage. In the dielectric withstanding voltage test, the applied potential shall be 600
volts rms at atmospheric pressure, and 250 volts rms at reduced barometric pressure.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order
*
(see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel
need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are
maintained by the Inventory Control Point's packaging activities within the Military Service or Defense Agency, or
within the military service's system commands. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible
packaging activity.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business