MIL-PRF-12934/9D
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein (except for related specification sheets), the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 General. The requirements for acquiring the product described herein shall consist of this document and
3.2 Interface and physical dimensions. The resistors shall meet the interface and physical dimensions specified in
figure 1.
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
.006
0.02
.010
0.25
.073
1.85
1.375
34.91
2.031
51.59
.001
0.03
.031
0.79
.093
2.36
1.875
47.63
2.025
57.13
.005
0.13
.062
1.57
.250
6.35
2.000
50.80
Maximum starting and running torque
Maximum
Power
(ounce-inch)
continuous
L
K
Stop-torque
rating
Style
Turns
working
Ten-turn
Per each additional
(max)
(max)
(pound-inch)
(watts)
voltage
single cup
ten-turn cup
1/
(volts)
Starting
Running
Starting
Running
2.250
2.000
RR2100
Ten
500
5.0
2.0
1.0
2.0
1.0
37.5
(57.13)
(50.80)
1/ When ten turn units are ganged, all cups will be 75 percent of rated wattage.
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
FIGURE 1. Style RR2100
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business