A-A-52176
3.23 Minimum voltage. The resistor shall be capable of not exceeding the minimum voltage expressed as a percent of applied voltage specified in Table VIII.
TABLE VIII. Minimum voltage.
|
Total resistance |
Standard minimum percent of total applied voltage |
|
Above 2 kilohms |
0.1 percent maximum |
|
Above 1 kilohm to 2 kilohms |
0.2 percent maximum |
|
Above 500 ohms to 1 kilohm |
0.4 percent maximum |
|
Above 200 ohms to 500 ohms |
1 percent maximum |
|
100 ohms to 200 ohms |
2 percent maximum |
3.24 End voltage. The maximum end voltage shall be as specified in Table VI.
3.25 Output smoothness. The initial output smoothness shall not exceed the initial values specified in Table V. The output smoothness shall not exceed the degradation values specified in Table V after exposure to environmental tests.
3.26 Terminal strength. The resistors shall be capable of submission to a terminal strength test without evidence of mechanical or electrical damage.
3.27 Thermal shock. The resistors shall be capable of withstanding a thermal shock test as described in method 107 of MIL-STD-202 and exhibit no evidence of mechanical damage, or opening of the element, and the total resistance change shall not exceed 10 percent of the initial resistance value.
3.28 Resistance-temperature characteristic. The resistance-temperature characteristic, referred to an ambient temperature of 25°C, shall not exceed the value specified in Table IX.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business