INCH-POUND
MIL-PRF-914/4B
22 April 2008
SUPERSEDING
MIL-PRF-914/4A
3 July 1997
PERFORMANCE SPECIFICATION
RESISTOR NETWORK, FIXED, FILM, SURFACE MOUNT, 20-PIN,
LEADLESS CHIP CARRIER, NONESTABLISHED RELIABILITY
AND ESTABLISHED RELIABILITY, STYLE RNS040
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall
consist of this specification sheet and MIL-PRF-914.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for RNS040 resistor networks. Resistors covered by
this specification are considered a monolithic design or wire bond and die construction. The established reliability
(ER) and nonestablished reliability (non-ER) styles are available in all characteristics and resistance tolerances.
1.2 Part or Identifying Number (PIN). Resistor networks covered by this specification are identified by a pin which
consists of the basic number of this specification and a coded number. The military PIN is in the following form:
M914G04
-
H1002FSS
⎪
⎪
Associated
Coded
specification
number
NOTE: The coded number is derived in accordance with MIL-PRF-914.
22. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract (see 6.2).
Comments, suggestions, or questions on this document should be addressed to US Army Communications -
Electronics Command and Fort Monmouth, ATTN: AMSEL-LC-LEO-E-EP, Fort Monmouth, NJ 07703-5023 or
emailed to Jeffrey.Carver@us.army.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business