INCH-POUND
MIL-PRF-39009/2C
5 November 2010
SUPERSEDING
MIL-PRF-39009/2B
3 July 1997
PERFORMANCE SPECIFICATION
RESISTORS, FIXED, WIRE-WOUND,
(POWER TYPE, CHASSIS MOUNTED),
NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY,
STYLES RER40, RER45, RER50, AND RER55
This specification is approved for all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall
consist of this specification sheet and MIL-PRF-39009.
1. SCOPE
1.1 Scope. This specification covers the associated requirements for nonestablished reliability and
established reliability styles RER40, RER45, RER50, and RER55 resistors. These resistors are
noninductively wound.
*
1.2 Part or Identifying Number (PIN). Resistors covered by this specification are identified by a PIN
which consists of the style designation, terminal, resistance, resistance tolerance, and product level
designator. The PIN is derived in accordance with MIL-PRF-39009 and is in the following form:
RER45
F
1001
S
│
│
│
│
Style
Resistance
Resistance
Product level
tolerance
designator
Comments, suggestions, or questions on this document should be addressed to: US Army
Communications - Electronics FDEC, ATTN: RDER-PRT, Fort Monmouth, NJ 07703-5201, or
emailed to Robert.Francis@us.army.mil. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 5905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business