INCH-POUND
MIL-PRF-39007/8L
17 October 2008
SUPERSEDING
MIL-PRF-39007/8K
3 July 1997
PERFORMANCE SPECIFICATION
RESISTOR, FIXED, WIRE-WOUND (POWER TYPE),
NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL
STYLE RWR80
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall
consist of this specification sheet and MIL-PRF-39007.
1. SCOPE
1.1 Scope. This specification covers the associated requirements for style RWR80, nonestablished
reliability, established reliability, and space level, power type, wire-wound, fixed, resistor. These resistors
are available with terminal types "S" (solderable, inductively wound), "W" (weldable, inductively wound), "N"
(solderable, noninductively wound), and "Z" (weldable, noninductively wound).
1.2 Part or Identifying Number (PIN). Resistors covered by this specification are identified by a PIN which
consists of the style designation, terminal and winding, coded resistive value, tolerance, and product level
designator. The PIN is derived in accordance with MIL-PRF-39007 and is in the following form:
S
1000
F
S
RWR80
│
│
│
│
│
Style
Terminal
Resistance
Resistance
Product level
wire and
tolerance
designator
winding
Comments, suggestions, or questions on this document should be addressed to US Army
Communications-Electronics FDEC, ATTN: AMSRD-CER-PR-D, Fort Monmouth, NJ 07703-5201 or emailed to
Jeffery.carver@us.army.mil. Since contact information can change, you may want to verify the currency
of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business