INCH-POUND
MIL-PRF-39005/3F
8 May 2008
SUPERSEDING
MIL-PRF-39005/3E
9 October 1997
PERFORMANCE SPECIFICATION SHEET
RESISTORS, FIXED, WIRE-WOUND (ACCURATE),
NONESTABLISHED RELIABILITY AND ESTABLISHED RELIABILITY
STYLE RBR54
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall
consist of this specification sheet and MIL-PRF-39005.
1. SCOPE
1.1 Scope. This specification covers the performance requirements for style RBR54, nonestablished
reliability, established reliability, accurate, wire-wound, fixed resistors.
*
1.2 Part or Identifying Number (PIN). Resistors covered by this specification are identified by a PIN
which consists of the style designation, terminal, resistance, resistance tolerance, and product level
designator. The PIN is derived in accordance with MIL-PRF-39005 and is in the following form:
RBR54
L
12601
F
S
│
│
│
│
│
Style
Terminal
Resistance
Resistance
Product level
tolerance
designator
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements documents cited in
sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
Comments, suggestions, or questions on this document should be addressed to: US Army
Communications-Electronics Command and Fort Monmouth, ATTN: AMSEL-LC-LEO-E-EP, Fort
Monmouth, NJ 07703-5023 or emailed to Jeffrey.Carver@us.army.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5905
DISTRIBUTION STATEMENT A . Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business