MIL-R-27208-4 Resistor, Variable, Wirewound, Adjustment Type, Lead Screw Actuated, Style Rt22This specification covers the requirements for style RT22 adjustment type, lead screw actuated, wirewound, variable resistors.

Pages 1 - 2 - 3 - 4 - 5 - 6

INCH-POUND MIL-R-27208/4J

11 October 2006

SUPERSEDING MIL-R-27208/4H

13 June 2001

MILITARY SPECIFICATION SHEET

RESISTORS, VARIABLE, WIRE WOUND, (ADJUSTMENT TYPE, LEAD SCREW ACTUATED), STYLE RT22

THIS SPECIFICATION INACTIVE FOR NEW DESIGN AFTER

5 OCTOBER 1973, (SEE 6.4).  USE MIL-PRF-39015/2.

This specification is approved for use by all Departments and agencies of the Department of Defense.

1.  SCOPE

1.1  Scope.  This specification covers the requirements for style RT22 adjustment type, lead screw actuated, wire wound, variable resistors.

*                1.2  Part or Identifying Number (PIN).  Resistors covered by this specification are identified by a PIN which consists of a basis style and a coded number.  The PIN is in the following form:

RT22                                        C2P102

⏐

             ⏐        

⏐

                    ⏐        

Style                                   Coded number

(see MIL-PRF-27208)

2.  APPLICABLE DOCUMENTS

2.1  General.  The documents listed in this section are specified in sections 3 and 4 of this specification.  This section does not include documents cited in other sections of this specification or recommended for additional information or as examples.  While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed.

2.2  Government documents.

*                2.2.1  Specifications, standards, and handbooks.  The following specifications, standards, and handbooks form a part of this document to the extent specified herein.  Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

Comments, suggestions, or questions on this document should be addressed to:  Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus Ohio 43218-3990, or emailed to resistor@dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.

AMSC N/A                                                                                                                                                          FSC 5905