INCH-POUND
MIL-R-10509/8E
10 August 2001
SUPERSEDING MIL-R-10509/8D
19 April 1989
MILITARY SPECIFICATION RESISTORS, FIXED, FILM (HIGH STABILITY), STYLE RN50
INACTIVE FOR NEW DESIGN AFTER 22 NOVEMBER 1968.
USE MIL-PRF-55182/7.
This specification is approved for use by all Departments
And Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for style RN50, high stability, film, fixed, resistors. This style is available in characteristics C, and E.
1.2 Part or Identifying Number (PIN). Resistors covered by this specification is identified by a PIN
which consist of the style of this specification and a coded number. The PIN is in following form:
RN50 D1003F
Specification style number
Coded number
2 APPLICABLE DOCUMENT
2.1 General. The documents listed in this section are specified in sections 3 and 4 of the specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Supply Center, Columbus, ATTN: DCSS-VAT, Post Office Box 3990, Columbus, Ohio 43216-5000, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of the document or by letter.
AMSC N/A FSC 5905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business