, nonestablished reliability, established reliability, and space level, film, fixed resistors. Designers are CAUTIONED on using these resistors in high power pulse applications \(see 6.3\).

Pages 1 - 2 - 3 - 4 - 5

INCH-POUND

MIL-PRF-55182/2K

26 September 2002

SUPERSEDING

MIL-PRF-55182/2J

9 June 1997

PERFORMANCE SPECIFICATION

RESISTORS, FIXED, FILM, NONESTABLISHED RELIABILITY,

ESTABLISHED RELIABILITY, AND SPACE LEVEL, STYLE RN*57 1/

INACTIVE FOR NEW DESIGN

AFTER 8 JULY 1970.

This specification is approved for use by all Depart-

ments and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification covers the associated requirements for style RN*57, nonestablished reliability,

established reliability, and space level, film, fixed resistors. 1/

1.2 Part or Identifying Number (PIN). Resistors covered by this specification are identified by a PIN which is

derived in accordance with MIL-PRF-55182 and is in the following form:

RN*57 1/

C1001FS

Style and Termination type

Coded number

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This

section does not include documents cited in other sections of this specification or recommended for additional

information or as examples. While every effort has been made to ensure the completeness of this list, document

users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this

specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a

part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are

those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and

supplement thereto, cited in the solicitation (see 6.2).

_________

1/ Third letter is variable, dependent upon lead material or capability.

Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in

improving this document should be addressed to: US Army Communications - Electronics Command, ATTN:

AMSEL-LC-LEO-E-EP, Fort Monmouth, NJ 07703-5023 by using the Standardization Document Improvement

Proposal (DD Form 1426) appearing at the end of this document or by letter.

AMSC N/A

FSC 5905

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.