MIL-PRF-39035-4 Resistor, Variable, Nonwirewound \(Adjustment Type, Single Turn\), Nonestablished Reliability, And Established Reliability Style Rjr50This specification covers the requirements for style RJR50, nonestablished reliability, and established reliability, adjustment type, single turn, nonwire-wound, variable resistors. This style is available in characteristic F. Characteristic H is inactive for new design.

Pages 1 - 2 - 3 - 4 - 5

INCH-POUND

MIL-PRF-39035/4G

2 April 2008

SUPERSEDING

MIL-PRF-39035/4F

12 February 1998

PERFORMANCE SPECIFICATION

RESISTORS, VARIABLE, NONWIREWOUND (ADJUSTMENT TYPE,

SINGLE TURN), NONESTABLISHED RELIABILITY, AND

ESTABLISHED RELIABILITY STYLE RJR50

This specification is approved for use by all Departments

and Agencies of the Department of Defense.

The requirements for acquiring the product described herein shall

consist of this specification sheet and MIL-PRF-39035.

1. SCOPE

1.1 Scope. This specification covers the requirements for style RJR50, nonestablished reliability, and established

reliability, adjustment type, single turn, nonwire-wound, variable resistors. This style is available in characteristic F

and H.

1.2 Part or Identifying Number (PIN). Resistors covered by this specification is identified by a PIN which consists

of a basis style of this specification and a coded number. The PIN is in the following form:

FP102M

RJR50

⎪

Specification

Coded

style number

number

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This

section does not include documents cited in other sections of this specification or recommended for additional

information or as examples. While every effort has been made to ensure the completeness of this list, document

users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this

specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a

part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are

those cited in the solicitation or contract (see 6.2).

Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center,

Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, Ohio 43218-3990 or by email Resistor@dla.mil.

Since contact information can change, you may want to verify the currency of this address information using the

AMSC N/A

FSC 5905