INCH-POUND
MIL-PRF-22/10D
1 May 2007
SUPERSEDING
MIL-PRF-22/10C
4 August 2000
PERFORMANCE SPECIFICATION
RESISTORS, VARIABLE, (WIREWOUND, POWER TYPE),
(UNENCLOSED), STYLE RP35
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for style RP35, variable, wirewound, power type,
unenclosed resistors.
1.2 Part or Identifying Number (PIN). Variable resistors covered by this specification are identified by a PIN which
is in the following form.
M22/10
-
0001
2
FD
Associated
Resistance value
Electrical off
Shaft and type
specification
designator
position
of mounting
number
(see 3.3)
(see 3.4)
(see 3.5)
NOTE: The slash "/" and the dash "-" are needed in the procurement of this part.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation (see 6.2).
DEPARTMENT OF DEFENSE SPECIFICATION
-
Resistors, Variable, (Wirewound, Power Type), General Specification for.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center, Columbus,
ATTN: DSCC VAT, Post Office Box 3990, Columbus, Ohio 43218-3990 or by email Resistor@dla.mil. Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at https://assist.daps.dla.mil/ .
AMSC N/A
FSC 5905
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business